Smart bonding. 2C PUR adhesives High performance bonds Collano’s 2C polyurethane adhesives are reactive systems which contain 100% solids. They are free of solvents, halogens and formaldehyde. No heat or moisture is required for their curing. Products The properties of 2C polyurethane adhesives can be broadly varied to meet specific requirements. The products can be formulated to be soft to hard, elastic to rigid. The table shows the major products of our port-folio and is a good illustration of the range of possible mechanical properties. © Collano Adhesives AG, Switzerland 10.2010 Properties and application-specific benefits – Wide range of applications (e.g. metals, GRP, plastics, derived timber products, cemented materials, hard foams, mineral fibres, recycled materials, synthetic resin) – Suitable for impervious and non-absorbent surfaces – Application-specific formulations ranging from soft to hard, elastic to rigid, slow to very fast – Adhesive cures by chemical reaction between the two components – Pot-life and reaction time can be adjusted to the manufacturing process – Controlled setting behaviour – Reaction at room temperature can be accelerated by heat – Non-toxic after the reaction. – High-strength adhesive bond – High impact resistance – Good mechanical properties – High resistance to weak alkalis, acids and solvents – Good resistance to liquids and weathering – Good temperature resistance (-40 bis 100 °C / short-term temperature to 180 °C) – Can be used as an adhesive and as a casting resin (non-sag to readily pourable) – Can be applied manually or by machine (trowelling, pouring, spraying) Two component spray application system. Applications for 2C PUR adhesives and casting resins PUR adhesives – Panels for cladding sheets, partition walls, ceilings and general insulation elements – Panels for cooling elements and containers – Door and gate panels, widening windows and door frames – Specialist doors (radiation protection doors, wet room doors, fire doors, sound-proof doors, external doors) – Panels for the transport industry (truck superstructure and floor sheeting, rail-car doors and roofs) – Gas and water pipe rehabilitation – Silo construction – Timber constructions, staircases Casting resins – Retrofitting of ducts – Prototyping and building of moulds – Filter industry – Electrical industry Contact Phone +41 41 469 92 75, Fax +41 41 469 93 68 [email protected] Technical data sheets Immediately obtainable from: www.collano.com

Smart bonding. 2C PUR adhesives High performance bonds Product Ultimate strain % Properties, application – Adhere to wide range of substrates – For flat area bonding – Can be used as potting compound – Adhere to wide range of substrates – Good adhesion on metal – Improved hydrolysis resistance – High heat resistance – Also available in cartridges – Good adhesion on Alu – Also available in cartridges – Adhere to wide range of substrates – Good adhesion on metal Collano RP 3013 © Collano Adhesives AG, Switzerland 10.2010 – ccelerated version of A Collano RP 3007 – Thixotrope, non sagging – Also...