*mydirectindustry

SDI-5

Product catalog summary

Overview: The Cold Jet SDI-5 product catalog provides detailed information on the SDI-5 dry ice blasting system and its components. It includes specifications, part numbers, and contact information for global support.

Specifications:

Hopper capacity: Up to 120 lbs (54.5 kg)
Variable feed rate: 1 to 6 lbs (0.5 to 2.7 kg) per minute
Blast pressure range: 40 to 250 psi (2.8 to 17.2 bar)
Weight: 430 lbs (195 kg)
Dimensions: 37” x 24.5” x 45” (94 cm x 62.2 cm x 114.3 cm)
Warranty: 12-month warranty with extended packages available

Product Features:

The SDI-5 is a dual-hose pneumatic blasting system using dry ice in various forms.
Includes a 120 lb hopper and variable dry ice pellet feed rate.
Comes with hose hanging devices for safe storage.
Includes a dry ice blast applicator, hose assembly, air hose, and customer-specified nozzle.

Nozzles and Accessories:

Flexible Nozzle: Available in 5/8” and 1/2” diameters, requires a special stinger.
Variable Flow Aggressive Nozzles: Available in Black ABS or Aluminum, with lengths of 3”, 5”, and 8”.
Dual Hose Blast Hose Assembly: Lightweight design for comfort during extended use.
Air Hose: Includes swivel adapters and requires a Whip Check for each length ordered.

Safety Accessories:

Fire Sleeve: Recommended for high-temperature exposure.
Whip Check: Recommended for each air hose length.
Safety Kit: Includes ear plugs, ear protectors, eye shield, gloves, and a dry ice scoop or block handler.

Contact Information: Global headquarters are located in Loveland, OH, USA, with regional offices in Europe, Germany, Canada, Latin America, the Middle East, and Asia/Pacific. Customer support is available through various hotlines and email addresses.

Catalog excerpts

PRODUCT CATALOG

Open the catalog to page 1

This catalog contains all of Cold Jet's SDI-5 product offerings and all part numbers that were current at the time of catalog production. Images shown are for representative purposes only. Products may vary from the images displayed. Cold Jet will always ship the latest version of each part. Invoices will always reflect the latest revision level numbers. Cold Jet is not liable for typographical errors or changes to specifications presented. Checkwww.coldjet.com for the most recent version of this document. Contact your Cold Jet representative for the most current information. General Contact...

Open the catalog to page 3

12-month warranty (extended warranty packages available)

Open the catalog to page 4

SDI-5 This versatile dual-hose all pneumatic blasting system utilizes dry ice block, pellets, or nuggets to create a blast stream at blast pressures ranging from 40 to 250 psi (2.8 to 17.2 bar). 120 lb (54.5 kg) hopper Hose hanging devices keep hoses safely stored on machine Variable dry ice pellet feed rate of 1 to 6 lbs (0.5 to 2.7 kg) per minute Fork lift tubes ensure balance and safety when moving and lifting The dry ice blasting system includes one length of dry ice blast applicator and hose assembly, one length of air hose, customer-specied nozzle (with appropriate handle if applicable)...

Open the catalog to page 5

Dual Hose Blast Hose Lightweight, ergonomie design allows to blast comfort during long periods of times Assembly comes with 25' (7.6 m) blast and air hose, and applicator. Applicator can be used with dry ice pellets as well as sugar- sized granules produced from shaved block • Used to carry pressurized air from air source to blast unit • Includes swivel adapters • For each length of hose ordered, order one Whip Check! Variable Flow Aggressive Nozzles Full pressure barrel blast nozzles in Black ABS or Aluminum. Nozzles have 1 1/4" (3.18 cm) OD. Minimum required flow rates range from 70 to 240...

Open the catalog to page 6

Nozzle Accessories Choosing a Stinger for your nozzle (using combination chart below): • Determine your desired blast pressure, if you wish to blast at 90 psi (6.2 bar), choose an LF-85, MF-85, or HF-85 stinger, each with an operating range of 50 - 100 psi (3.4 - 6.9 bar). • Based on the air flow rate your compressor can provide, choose a Low Flow, Medium Flow, or High Flow stinger. (For maximum cleaning aggression, choose the highest air flow available from your compressor). • Once you have selected a stinger, examine the chart below to determine which nozzle series (above) is appropriate for...

Open the catalog to page 7