Technical Specifications:
Dimensions: The machine measures 1500 mm (59 in) in length and width, with a height of 1800 mm (71 in) or 1870 mm (74 in) including external legs. It weighs 1925 kg (4244 lbs).

Rated Output: The machine can produce up to 750 kg/h (1653 lbs/h) of high-quality dry ice pellets, depending on the extruder plate used. Pellet sizes range from 3 mm to 16 mm in diameter.

Pressure Requirements: Inlet liquid CO2 pressure ranges from 16 to 22 bar (232 to 319 psi), with a back pressure on revert gas of 0 to 1 bar (0 to 14.5 psi).

Power Supply: The CE power supply is 3 x 400 V AC + PE, 50Hz, with a maximum current of 32 A. The UL power supply is 3 x 480 V AC + PE, 60Hz, also with a maximum current of 32 A. The rated power is 11 kW (15 Hp).

Noise Level: The noise level is below 75 dB(A).

Product Features:
The IceMaker PR750H can produce two sizes of pellets simultaneously, specifically 3 mm and 16 mm pellets.

Installation and Operation:
The pelletizer must be installed on a horizontal concrete floor with adequate load-carrying capacity, free of cracks and structural deficiencies. Minimum clearance distances must be observed for servicing and opening cabinet doors. Installation must be performed by a Cold Jet service technician or an approved technician.

Connectivity:
If connected to a LAN or the Internet, the display can be transferred to a computer desktop anywhere in the world, allowing for online support using diagnostic software on the industrial PC.