Aero Series
18Pages

Aero Series Product Catalog

Aero Series Dry Ice Cleaning Equipment This catalog contains Cold Jet’s Aero product offerings and part numbers that were current at the time of catalog production. An item’s display in this catalog does not guarantee the item’s availability at any time in the future. Images shown are for representative purposes only. Products may vary from the images displayed. Cold Jet will always ship the latest version of an available part, part numbers may vary, and invoices will always reect the latest revision numbers. Cold Jet is not liable for typographical errors or changes to specications...

Aero Series Dry Ice Cleaning Equipment

Aero 80 Series Aero 80 Series Dry Ice Blast Cleaning Systems The Aero 80 Series Blast Cleaning System comes complete with the following: • One length of 1” (2.5 cm) blast hose • One length of air hose • Applicator without light (Aero 80) with light (Aero 80 HP) • Specied nozzle to best suit cleaning application needs • Static Bond Cable • Nozzle Hanger (qty 1 for Aero 80/ qty 2 for Aero 80 HP) • Hose Wrap (qty 2) and Hose Carrier (qty 2) The following additional items for Aero 80 HP • Hose Hangers (qty 2) • Cord Wrap • Extension Cord (110V version only) • Retractable Static Ground Reel •...

Aero 40 Series Aero 40 Series Dry Ice Blast Cleaning Systems The Aero 40 Series Blast Cleaning System comes complete with the following: • One length of 1” (2.5 cm) blast hose • One length of air hose • Applicator without light (Aero 40) with light (Aero 40 HP) • Specied nozzle to best suit cleaning application needs • Static Bond Cable • Nozzle Hanger (qty 1) • Hose Wrap (qty 2) and Hose Carrier (qty 2)

Aero V Aero V Dry Ice Blast Cleaning System The Aero V Blast Cleaning System comes complete with the following: • One length of 1” (2.5 cm) blast hose • One length of air hose • Lightweight Applicator • Variable nozzle of choice • Internal pressure regulator • Static Bond Cable • Hose Wrap (qty 1) • Hose/Nozzle Management Part #: 2A0265 - Aero V

Aero C100 Aero C100 Dry Ice Blast Cleaning System The Aero C100 Blast Cleaning System comes complete with the following: • One length of 1” (2.5 cm) blast hose • One length of air hose • Pneumatic Applicator without light • Specied nozzle to best suit cleaning application needs • Static Bond Cable • Nozzle Hanger (qty 1) • Hose Wrap (qty 2) and Hose Carrier (qty 2) • 1 qt/litre of Food Grade Oil Part #: 2A0155 - Aero C100

Cold Jet’s Aero nozzles are designed to maximize performance whatever the application. Broad or precise cleaning, hard to reach areas or working in a conned space, our line of nozzles will exceed your expectations. Recommended operating parameters are shown in the tables for each nozzle. Nozzles noted with (*) are recommended for use where blasting pressure is >140 psi (9.7 bar). Recommended accessory handle is noted where applicable. Low and Standard Flow Nozzles These straight nozzles have standard air consumption rate of 100 cfm or less at 80 psi. Blast Swath Feed rate Anodized Aluminum...

Variable Fragmenting MERN Nozzles With patented MERN technology and new variable fragmenting technology you have the power to control aggression downstream of the nozzle throat for a full range of performance with maximum effectiveness the most ever from a single nozzle. 110V.6 Blast Swath Feed rate Specialty Nozzles These nozzles have various congurations for special applications and operate with air consumption rates as noted. 112HK Blast Swath Swath Orientation Feed rate Material Polymer Coated SST Polymer Aluminum Polymer Coated SST Multi

Nozzle Extension Tubes Extension tubes are used to extend nozzles when additional reach is needed with minimal pressure loss. Extension tubes connect to nozzle and applicator with proper ttings (not included). Nozzle Extension Tube 3/4” (1.9 cm) OD Internal threaded end ttings. Available in 10” (25.4 cm), 20” (50.8 cm), and 30” (76.2 cm) Recommended for use with nozzles that have a ow rating <100 cfm @ 80 psi (2.8 m3/min @ 5.5 bar) Stainless Steel Part #: 3E0715 - Length Nozzle Extension Tube 1” (2.5 cm) OD Internal threaded end ttings Available in 10” (25.4 cm), 20” (50.8 cm), and 30”...

Nozzle Accessories Extension tubes are used to extend nozzles when additional reach is needed with minimal pressure loss. Extension tubes connect to nozzle and applicator with proper ttings (not included). Aero 80 Aero 40 Series Series JICF Quick Change Module Enables quick and safe nozzle changes Can be used with all nozzles, with appropriate couplings and end ttings Nozzle Adapter 3/4” (1.9 cm) JICM Used with 3/4” (1.9 cm) JICF nozzles and extension tubes when used with AeroTech Applicator or QCM. Aluminum Nozzle Adapter 1” (2.5 cm) JICM Allows connection of extension tube to applicator...

Applicators Aero 80 Series AeroTech Applicator Lightweight applicator with a low center of gravity signicantly reduces arm fatigue. Safety on/off switch to ensure safety when not blasting. Trigger switch allows the ability to blast with “Air Only” when purging the system and “Air and Ice” when ready to clean. Integrated Quick Change feature enables operators to change nozzles safely and easily. Military-Grade light attachment mounted on top of Applicator will illuminate area being cleaned. Part #: 2E0425-G1 (Applicator without light) Standard on Aero 40/80 Part #: 2E0425-G2 (Applicator with...

Blast Hose* * One corresponding Bond Cable Shaft Collar is required per complete hose run (not one per section) Blast Hose 20’ (6.1 m) section Designed to eliminate constrictions and freezing up during blasting. Rated to 300 psi (20.7 bar) Part #: 2N0254-G1 - 3/4” (1.9 cm) ID Part #: 2N0254-G2 - 3/4” (1.9 cm) ID (with Control Cable) Part #: 2N0254-G3 - 3/4” (1.9 cm) ID (with Air Tubing) Part #: 2N0255-G1 - 1” (2.5 cm) ID Part #: 2N0255-G2 - 1” (2.5 cm) ID (with Control Cable) Part #: 2N0255-G3 - 1” (2.5 cm) ID (with Air Tubing) Part #: 2N0256-G1 - 1 1/4” (3.2 cm) ID Part #: 2N0256-G2 - 1...