Overview

This document provides technical data and specifications related to piping systems used in waste incineration plants, focusing on plastic piping materials.

Sections and Key Information

1. Pipeline Construction

The document references pipeline construction specifically for plastic piping systems, although detailed construction procedures are not provided.

2. Waste Incineration Plant Technical Data

The piping material specified for general waste incineration plant applications is polypropylene (PP). This material is highlighted for its suitability in such environments.

3. Refuse Incineration Plant - NOx Washer Piping

For piping systems associated with NOx washers in refuse incineration plants, the materials used are polypropylene (PP) and glass fiber reinforced plastic (GFK). These materials are selected likely due to their chemical resistance and mechanical properties.

4. Refuse Incineration Plant Technical Data

Multiple references confirm the use of PP and GFK as piping materials in refuse incineration plants, emphasizing their importance and repeated application.

Summary of Materials

• PP (Polypropylene): Used broadly in waste incineration plant piping systems.
• GFK (Glass Fiber Reinforced Plastic): Used in combination with PP, especially for NOx washer piping, indicating enhanced strength and chemical resistance.

Critical Points

• Plastic piping systems are preferred for waste and refuse incineration plants.
• Material selection focuses on PP and GFK due to their technical suitability.
• NOx washer piping requires materials that can withstand specific chemical and mechanical stresses, hence the use of PP/GFK.

Limitations

The document lacks detailed procedural guidelines, installation standards, or performance parameters. It primarily lists materials and their application contexts.