1. Catalogs
  2. Coilhose Pneumatics
  3. Air Tool Lubricant Safety Data Sheet

Air Tool Lubricant Safety Data Sheet

Air Tool Lubricant Safety Data Sheet

Air Tool Lubricant Safety Data Sheet

Product catalog summary
Product Information: The document is a Safety Data Sheet (SDS) for Coilhose Pneumatics/Acme Automotive Air Tool Lubricant, covering product numbers ATL004, ATL016, ATL032, ATL128, ATL55, A145-4, A145-16, A145-32, A145-128. The manufacturer is located in East Brunswick, NJ, USA.
Hazard Identification: The lubricant is a petroleum hydrocarbon mixture with a low health hazard rating. It can cause skin and eye irritation and has a low order of oral and dermal toxicity. It is not classified as a carcinogen.
Chemical Composition: The lubricant is composed of over 99% petroleum-based lubricating oil and less than 1% butylated hydroxytoluene. Exposure limits are set at 5 mg/m3 for both OSHA PEL and ACGIH TLV.
First Aid Measures: In case of eye contact, flush with water for 15 minutes. For skin contact, wash with soap and water. If inhaled, move to fresh air and seek medical attention if necessary. Do not induce vomiting if ingested.
Fire Fighting Measures: The flash point is 177°C (350°F). Suitable extinguishing media include foam, water spray, dry chemical, and carbon dioxide. Firefighters should use protective equipment and breathing apparatus.
Accidental Release Measures: Prevent the product from entering sewers or watercourses. Absorb spills with inert material and dispose of according to local regulations.
Handling and Storage: Keep containers closed and away from heat, sparks, and flames. Use appropriate ventilation to prevent vapor buildup.
Exposure Controls/Personal Protection: Use chemical-resistant gloves and eye protection. Ensure adequate ventilation and use respiratory protection if necessary.
Physical and Chemical Properties: The product is an amber liquid with a petroleum odor, insoluble in water, and has a specific gravity of less than 1.0.
Stability and Reactivity: The product is stable under normal conditions but should be kept away from strong oxidizers and open flames.
Toxicological Information: No established acute or chronic toxicity data. The product does not contain carcinogenic ingredients.
Ecological Information: Not established.
Disposal Considerations: Dispose of in accordance with federal, state, and local regulations.
Transportation Information: The product is not regulated by the Department of Transportation.
Regulatory Information: The product does not contain chemicals subject to SARA regulations.
Additional Information: The information is accurate to the best of the manufacturer's knowledge, but users should verify current data for their specific use.
See more

Catalog excerpts

Air Tool Lubricant Safety Data Sheet-1

Section 1 : Chemical Product And Company Information Product Name : Manufacturer Name : Coilhose Pneumatics/Acme Automotive 19 Kimberly Road East Brunswick, NJ 08816 USA General Information : (732) 390-8480, Monday – Friday 8:00 AM to 5:30 PM EST (503) 434-5964, Monday – Friday 8:00 AM to 5:30 PM PST Emergency Information : (800) 222-1222 (Poison Control USA) 24 Hours (800) 424-9300 (CHEMTREC) 24 Hours Transportation Information : Not regulated by Department of Transportation (DOT) Section 2 : Hazard Identification Hazardous Materials Identification System (HMIS) : Health Flammability 1 1 Chemical Name : Chemical Family : Petroleum Hydrocarbon Product Appearance and Odor : Amber Liquid, petroleum odor Inhalation and skin contact Potential Health Effects : Prolonged or repeated skin contact with this product tends to remove skin oils possibly leading to irritation and dermatitis. Product contacting the eye may cause irritation. Product has a low order of oral and dermal toxicity. Possible aspiration hazard. Induced vomiting may cause aspiration of product into the lungs. OSHA Designation : IARC Designation : Skin and eye irritation, defatting of skin, nausea and vomiting. Coilhose Pneumatics/Acme Automotive Air Tool Lubricant SDS Page 1 of 6

 Open the catalog to page 1
Air Tool Lubricant Safety Data Sheet-2

Section 3 : Chemical Composition Chemical Name Petroleum based lubricating oil ACGIH STEL/Ceiling Chemical Name Butylated hydroxytoluene ACGIH STEL/Ceiling Section 4 : First Aid Measures Eye Contact: Flush with clear water for at least 15 minutes. If irritation persists, seek medical attention. Skin Contact: Remove contaminated clothing and wash skin thoroughly with soap and water. Vapor pressure is very low. Vapor inhalation under ambient conditions is normally not a problem. If overcome by vapor from hot product, immediately remove to fresh air and call a physician. If breathing is irregular...

 Open the catalog to page 2
Air Tool Lubricant Safety Data Sheet-3

Revision Date: 24-JAN-14 extinguishing fires involving this type product, depending on size or potential size of fire and circumstances related to the situation. Water froth may be used to flush spills away from exposure. Fire Fighting Procedures : Minimize breathing gases, vapor, fumes, and smoke, or decomposing products. Do not enter any enclosed or confined area without proper protective equipment and breathing apparatus. Section 6 : Accidental Release Measures Leak Response : Keep product out of sewers and watercourses by diking or impounding. Absorb with sand or inert material. Sweep or...

 Open the catalog to page 3
Air Tool Lubricant Safety Data Sheet-4

Revision Date: 24-JAN-14 to splashing or spraying of material. Other Protective Equipment : Use chemical-resistant apron or other impervious clothing, if needed, to avoid contaminating regular clothing, which could result in prolonged or repeated skin contact. Personal Hygiene : There are no known hazards associated with this material when used as recommended. The following general hygiene considerations are recognized as common good industrial hygiene practices. Minimize breathing vapor, mist, or fumes. Avoid prolonged or repeated contact with skin. Remove contaminated clothing; launder or dry-clean...

 Open the catalog to page 4
Air Tool Lubricant Safety Data Sheet-5

Section 10 : Stability and Reactivity Chemical Stability : Open flames Incompatibilities with Other Materials : Strong oxidizers, concentrated oxygen, sodium or calcium hypochlorite for explosion hazard Hazardous Polymerization : Hazardous Decomposition Products : (Under fire conditions) Smoke, fumes, carbon monoxide, and other decomposition products in case of incomplete combustion. Section 11 : Toxicological Information Oral (Acute) : Dermal (Acute) : Inhalation (Acute) : Medical Conditions Aggravated by Exposure : Toxicological Paragraph : This product does NOT contain any ingredients identified...

 Open the catalog to page 5
Air Tool Lubricant Safety Data Sheet-6

Applies to all ingredients: SARA : This material is not known to contain any chemicals at a concentration of greater than 1.0 percent or carcinogenic chemicals at a concentration greater than .01 percent. Section 16 : Additional Information Disclaimer : The above information is accurate to the best of our knowledge. However, since data, safety standards, and government regulations are subject to change and the conditions of handling and use, or misuse use beyond our control, seller makes no warranty, either expressed or implied, with respect to the completeness or continuing accuracy of the information...

 Open the catalog to page 6
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.