*mydirectindustry

Catalogs
COHERENT
StarFiber 100/200/400/600

StarFiber 100/200/400/600

Product catalog summary

Overview: The Coherent StarFiber laser series, including models 100, 200, 400, and 600, is designed for fine welding, cutting, and drilling applications. These lasers are compact, robust, and optimized for industrial material processing, offering high efficiency and easy integration.

Features & Benefits:

Power range from 100 to 600 W.
High efficiency with options for scanner and fixed optics.
Incorporates Coherent SmartWeld™ technology for enhanced welding properties.
Innovative control unit for convenient operator control.

Applications:

Fine Welding
Fine Cutting
Drilling

Specifications:

Wavelength: 1070 nm
Output Power: Up to 600 W
Pulse Frequency: Single-Shot up to 170 kHz for models 100 and 200; up to 50 kHz for models 400 and 600.
Pulse Width: 0.5 to CW for models 100 and 200; 1.0 to CW for models 400 and 600.
Beam Quality: M² < 1.1
Fiber Connection: QCS for models 100 and 200; RQB and QBH for models 400 and 600.

Environmental and Electrical Operating Conditions:

Supply Voltage: 208 to 240 V for models 100 and 200; 440 V for models 400 and 600.
Line Frequency: 50/60 Hz
Cooling: Air

Standardized Interfaces: Parameter set via 24 V parallel I/O, communication via Ethernet, analog (0-10 V). Safety shutter according to DIN EN 13849-1.

Options:

Application packages for fine welding and cutting.
Process visualization via camera.
Pattern recognition and remote maintenance.

Safety: Class 1 laser product with caution to avoid eye or skin exposure to direct or scattered radiation.

Warranty: Coherent offers a limited warranty for all StarFiber models. For details, refer to the Service section on the Coherent website.

Catalog excerpts

StarFiber 100/200/400/600 Fiber Laser for Fine Welding, Cutting, and Drilling The Coherent StarFiber laser is robust, compact, and satisfies all criteria for optimized industrial laser material processing. For laser joining, StarFiber allows very small seam geometries at very high welding speeds. The welded joints show maximum strength with minimal heat input to the workpiece. Laser fine cutting and drilling with StarFiber results in clean cuts with low heat affected zones and high edge qualities. FEATURES & BENEFITS • 100 to 600 W • High efficiency • Available with scanner and fixed optics • Coherent SmartWeld™ technology for optimized welding properties • Easy to integrate • Convenient operator control through innovative control unit (RCU) APPLICATIONS • Fine Welding • Fine Cutting • Drilling

Open the catalog to page 1

AVAILABLE SCANNER AND FIXED OPTICS Application Package “Fine Welding” (Scanner Optics) Application Package “Fine Welding” (Fixed Optics) Application Package “Fine C

Open the catalog to page 3

MECHANICAL SPECIFICATIONS StarFiber Front View Rear View Side View Coherent, Inc., 5100 Patrick Henry Drive Santa Clara, CA 95054 p. (800) 527-3786 | (408) 764-4983 f. (408) 764-4646 [email protected] www.coherent.com VISIBLE AND INVISIBLE LASER RADIATION Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent offers a limited warranty for all StarFiber 100/200/400/600 Lasers. For full details of this warranty coverage, please refer to the Service section at www.Coherent.com or contact your local Sales or Service Representative....

Open the catalog to page 4

All COHERENT catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list