*mydirectindustry

Mira HP

Product catalog summary

Overview: The Mira HP series are high-power ultrafast Ti:Sapphire oscillators known for their superior reliability and performance. They are designed with advanced features and specifications to cater to scientific and industrial applications.

Mechanical Specifications: The laser head dimensions are 111.1 x 38.1 x 19.7 cm (43.75 x 15 x 7.75 in.). The design includes integrated pump beam steering optics and multiple pump port options, making it user-friendly with a wide range of accessories available.

Features:

High-power modelocked output
Optima™ control & diagnostics package including fast photodiode and autoranging power monitor detector
Automatic modelocking starter and β-Lock™ automatic GTI control
Integrated CW alignment cavity

System Specifications:

Output Power: Mira HP-F >3.5 W, Mira HP-P >2.8 W
Pulse Width: Mira HP-F <150 fs, Mira HP-P <2 ps
Tuning Range: 700 to 980 nm
Repetition Rate: 76 MHz
Noise: <0.1%
Stability: <3%
Beam Diameter: 0.8 mm
Beam Divergence: 1.7 mrad
Spatial Mode: TEM00
Polarization: Horizontal

Safety and Compliance: The product emits visible and invisible laser radiation and is classified as a Class IV laser radiation product per EN60825-1 (A2:2001). Users should avoid direct or scattered radiation exposure.

Warranty and Support: Coherent offers a limited warranty for all Mira HP lasers. For detailed warranty coverage, users are advised to refer to the service section on the Coherent website or contact local sales or service representatives.

Graphical Data: The document includes typical X-Wave power curves for Verdi-V18 pumped Mira HP-F and Mira HP-P, illustrating output power across different wavelengths.

Catalog excerpts

Mira HP High-Power Ultrafast Ti:Sapphire Oscillators Features • High-power modelocked output • User-friendly cavity layout • Optima™ control & diagnostics package - Fast photodiode - Autoranging power monitor detector - CW detector - Automatic modelocking starter - β-Lock™ automatic GTI control • Wide range of accessories available - SynchroLock™-AP - Pulse picker - Harmonic generator - Mira™ OPO • Integrated pump beam steering optics • Multiple pump port options • Integrated CW alignment cavity Mechanical Specifications Top View Laser Head Alternate Input Front View Rear View Side View Superior Reliability & Performance

Open the catalog to page 1

Mira™ HP High-Power Ultrafast Ti:Sapphire Oscillators System Specifications1 Mira HP-D Dual platform contains all hardware necessary for both femtosecond (-F) and picosecond (-P) operation. Pulse Width2,3,4 Tuning Range (nm)(X-Wave™ Optics) Repetition Rate (MHz)(nominal) Noise5 (%) Stability6 (%) Beam Diameter7 (mm) Beam Divergence8 (mrad) Spatial Mode9 Polarization Physical Dimensions Meter Sensor Measurement Tools FieldMaxII™-TO power meter (part number 1070873) PM10 power detector (part number 0012-0920) Specifications apply only with Coherent Verdi™-V18 pump lasers. At 800 nm. 3 Based on...

Open the catalog to page 2

All COHERENT catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list