Catalog excerpts
Cogsdill Tool Products, Inc. SR Series Internal Roll-a-Finish® tools Our premier line of internal Roll-a-Finish® tools, designed to suit all applications. Ideal for applications where tool length is restricted by tool changers, turrets, etc. Offered in three styles: ■ Through-hole style with nohelix cage (machine-feeding) ■ Through-hole style with helix cage (self-feeding) ■ Bottoming-style for blind hole, with no-helix cage (machinefeeding) ... with up to four ■ ThroughHole (No Helix) work lengths: Two inch (SR) Four inch (SR-4) ■ Six inch (SR-6) ■ Eight inch (SR-8) ... and available from stock: ■ for hole sizes from .187 to 2.500 inches (4.75 to 63.5mm). ■ Tools are adjustable in increments of .0001 inch (.002mm). ■ 6 ThroughHole (Helix) Bottoming (No Helix)
Open the catalog to page 1Internal Roll-a-Finish® tools SR series Standard tool specifications WORK LENGTH - TOOL PROJECTION "SR" SERIES ROLL-A-FINISH® TOOLS 3/16 TO 1/4 IN. (4.76 TO 6.35mm) DIAMETER RANGE TOOL NUMBER TOOL PROJECTION "SR" SERIES ROLL-A-FINISH® TOOLS 1/4 TO 1/2 IN. (6.35 TO 12.70mm) DIAMETER RANGE TOOL NUMBER Shanks other than shown above are available upon request.
Open the catalog to page 2Internal Roll-a-Finish® tools SR series Standard tool specifications - WORK LENGTH - TOOL PROJECTION "SR" SERIES ROLL-A-FINISH® TOOLS 1/2 TO 1 IN. (12.70 TO 25.40 mm) DIAMETER RANGE TOOL NUMBER Shanks other than shown above are available upon request.
Open the catalog to page 3Internal Roll-a-Finish® tools SR series Standard tool specifications TOOL PROJECTION "SR" SERIES ROLL-A-FINISH® TOOLS 1 TO 1-5/8 IN. (25.4 TO 41.28mm) DIAMETER RANGE TOOL NUMBER Shanks other than shown above are available upon request.
Open the catalog to page 4Internal Roll-a-Finish® Tools SR series Standard Tool specifications TOOL PROJECTION "SR" SERIES ROLL-A-FINISH® TOOLS 1-5/8 TO 1-7/8 IN (41.28 TO 47.63mm) "SR" SERIES ROLL-A-FINISH® TOOLS 1-7/8 TO 2-5/32 IN. (47.63 TO 54.76mm) Shanks other than shown above are available upon request.
Open the catalog to page 5Internal Roll-a-Finish® tools SR series Standard Tool specifications TOOL PROJECTION UNLIMITED WORK LENGTH "SR" SERIES ROLL-A-FINISH® TOOLS 2-5/32 to 2-1/2 in. (54.76 to 63.5mm) Shanks other than shown above are available upon request.
Open the catalog to page 6All Cogsdill - Nuneaton catalogs and technical brochures
-
Nobur® Tool
5 Pages
-
Generating Heads
8 Pages
-
Nobur JA Recessing Head
8 Pages
-
AEX Series
4 Pages
-
U Series
2 Pages
-
CX Machine Selection Guide
8 Pages
-
Roll-a-Finish Bill of Materials
31 Pages
-
Burnishing
64 Pages
-
Smooth Edge Deburring Tool
12 Pages
-
ZX Systems Overview
4 Pages
-
ZX MBT-S brochure
5 Pages
-
ZX MBT-T brochure
5 Pages
-
Tools
8 Pages
-
Grooving
6 Pages
-
Flipcut
16 Pages
-
ZX Systems
36 Pages
-
Recessing
64 Pages
-
Reaming
48 Pages
-
Deburring
28 Pages