Grooving
6Pages

Catalog excerpts

maximum depth to first groove 9.923.501.700.751.25 Note: Pilots made to fit TEMA standard tube sheet hole diameters. (See under Ordering, Pilot Only,Ӕ back page.) Overtravel and morse taper shanks are available (see ordering information on back panel). Interchangeable pilots allow easy diameterchanges. Pilots are specifically designed to maximize coolant flow for enhanced tool life.High-speed steel cutters are TiN-coatedfor long life. >

Open the catalog to page 3

CMYK ■ Refer to details drawing on reverse side. ■ MAKE SURE ■ The cutter ( Detail #8 ) is mounted in the arm ( D #2 or #3 ) with two ( 2 ) #4-40 x 0.25 Torxscrews ( D #9 ). Ԣ֠ The pilot ( D #4, #5, #6, or #7 ) and arm are installed at the same time. ■ The pull yoke end of the arm ( opposite the cutter end of the arm ) is installed on thedowel (pull) pin ( D #34 ) in the recessing head. The arm should be installed with theelevated platform contacting the leaf springs ( D #24 ) in the head. ■ Insert the pilot into the head, making sure the arm is mounted in the slot in the pilot. Thepilot...

Open the catalog to page 4

■ COMPLETE TOOL ASSEMBLY ■ Par t number Description ■ TSP-00625 5/8 in. complete tool with 3/4 in. SS ■ TSP-00750 3/4 in. complete tool with 3/4 in. SS ■ TSP-00875 7/8 in. complete tool with 3/4 in. SS ■ TSP-01000 1 in. complete tool with 3/4 in. SS ■ TSP-00625-3MT 5/8 in. complete tool with #3MT ■ TSP- 00750-3MT 3/4 in. complete tool with #3MT ■ TSP-00875-3MT 7/8 in. complete tool with #3MT ■ TSP-01000-3MT 1 in. complete tool with #3MT ■ TSP-00625-1OT 5/8 in. complete tool with 1 in. SS with OT* ■ TSP-00750-1OT 3/4 in. complete tool with 1 in. SS with OT* ■ TSP-00875-1OT 7/8 in. complete...

Open the catalog to page 6

Grooving 6Pages

Catalog excerpts

All Cogsdill - Nuneaton catalogs and technical brochures

Grooving
6Pages