BROCHURE 2017 • 2020
23Pages

PIPE BEVELLING, CUTTING & FACING MACHINE

COFIM Industry Have 30 years experience in manufacturing machines for pipe and tube technology used in many industries. We design quality products compliant to the most difficult industrial requirements. Our engineering office is able to design special machines to your specific needs; we can also customize standard equipment to meet requirements. COFIM® machines respect ISO 5349 to prevent vibration-induced white finger (VWF). Motors are all equipped with safe start handles & SJS burn out protection (electric). ATEX certified, plate cover and pedal switch on request. PIPE BEVELLING MACHINE...

51mm ID -219mm OD PIPE BEVELLING MACHINE INTERNAL CLAMPING ✓ OPTIONS TU5 CAN BE EQUIPPED WITH: 01 • Flange facing attachment 02 • Ovality tracker 03 • Enveloping jaws 04 • Work station 565mm MACHINE CLAMPING RANGE MACHINING RANGE WALL THICKNESS

27mm ID -114mm OD PIPE BEVELLING MACHINE * PIPE BEVELLING MACHINE INTERNAL CLAMPING INTERNAL CLAMPING ✓ OPTIONS TU2 CAN BE EQUIPPED WITH: 01 • Automatic clamping 02 • Specific tool holder 03 • Tool plate holder ✓ OPTIONS TU3 CAN BE EQUIPPED WITH: 01 • Automatic clamping 02 • Elbow clamping 03 • Flange facer 27mm - 300mm 04 • Specific tool holder with micrometric advance ajustment Reduced shaft 16mm ID to 29mm ID ■WALL THICKNESS STROKE

PIPE BEVELLING MACHINE J BEVELLING MACHINE INTERNAL CLAMPING INTERNAL CLAMPING ✓ OPTIONS TU6 CAN BE EQUIPPED WITH: 01 • 8 cutting side inserts 02 • Ovality tracker 03 • Metalic box ✓ OPTIONSTU12 CAN BE EQUIPPED WITH: 01 • ID ovality tracker 02 • Single point mechanical carriage by template reproduction from 400mm ID up to 900mm OD with standard carbide insert Single point carriage with adjustable angle from 200mm ID up to 900mm OD

PIPE BEVELLING MACHINE j INTERNAL CLAMPING 01 • ID ovality tracker 02 • Single point mechanical carriage by template reproduction from 400mm ID up to 900mm OD with standard carbide insert 1330mm Single point carriage with adjustable angle from 200mm ID up to 900mm OD Weight TU14 P: 410kg Weight TU14 H: 410kg Manual clamping Manual feeding Heavy duty tool plate PIPE FACING MACHINE To machine thin-wall pipes quickly, precisely, without leaving mark or burr with portable COFIM MACHINING RANGE ■WALL THICKNESS STROKE mark or burr with portable COFIM Industry facing machines type DE & TUDC.

OPTIONS TUDC168 CAN BE EQUIPPED WITH 01 • Work station 02 • Specific tool holder with micrometric advance ajustment Automatic clamping Feed limit stops MACHINE MACHINE CLAMPING RANGE CLAMPING RANGE MACHINING RANGE MACHINING RANGE WALL THICKNESS WALL THICKNESS TYPE MOTORIZATION Speed variator Speed variator Speed variator

20mm OD -63mm OD PIPE FACING MACHINE PIPE FACING MACHINE EXTERNAL CLAMPING ✓ OPTIONS ✓ OPTIONS THE DE SERIES CAN COVER FROM 3MM TO 63 MM WITH 2 HEADS AND 1 MOTOR. 01 • Right angle drive 02 • Bevelling carbide insert 03 • Motor 220V/110V 290mm THE DE SERIES CAN COVER FROM 3MM TO 63 MM WITH 2 HEADS AND 1 MOTOR 300.2mm ✓ FEATURES • 1 collar per diameter (carbon or stainless) • 0-400rpm - 2 speeds • Chip protection • 4 sided carbide Insert • Chip deflector • 2 batteries • 1 charger • 1 plastic box MACHINING RANGE 01 • Right angle drive 02 • Bevelling carbide insert 03 • Motor 220V/110V...

PIPE FACING MACHINE EXTERNAL CLAMPING ✓ OPTIONS 292mm (tu3d electric)✓ OPTIONS 328mm (tud electric) TUD CAN BE EQUIPPED WITH TU3D CAN BE EQUIPPED WITH 01 • Specific tool holder with carbide insert 02 • Motor in line 03 • Specific clamping 01 • Specific tool holder with carbide insert 02 • Motor in line 03 • Specific clamping Short clamping jead Milling head Short clamping head Milling head MACHINE MACHINING RANGE MACHINE MACHINING RANGE Speed variator Speed variator Speed variator

✓ OPTIONS TUDC76 CAN BE EQUIPPED WITH: 01 • Work station 02 • Short & extra short clamping ✓ OPTIONS TUDC114 CAN BE EQUIPPED WITH: 01 • Work station 02 • Specific tool holder with micrometric advance ajustment Carbide inserts and special tool Automatic feeding Feed limit stops MACHINING RANGE ■WALL THICKNESS STROKE MACHINING RANGE ♦ wall thickness stroke

ENHANCED TRACEABILITY Consumables optimization Alpha Module Alpha® module is more than a machine. It’s a global, portable, solution which enables operators to perform easily complex bevels and other tube end preparation through a friendly digital Human-Machine Interface (HMI). Franck VICENTE General manager • COFIM Industry 100% digital with intuitive Human-Machine Interface complete with a tube and bevel types database • Compatible with all brands of machinery used for cutting, bevelling, boring, surfacing • Operational to machine all kinds of tubes: thickness and material • Records...

TOOLS COFIM Industry offers a wide range of bevelling tools. The HSS form tools to perform all designs of bevels (90°/0°, 37°, 37.30°, 45°) of counterboring of 15° in standard version. CT 7-61 TOOLS Standard ISO carbide inserts are placed in COFIM insert holders. This type of tool-bits enable to reduce consumable cost and sourcing time. For instance, TU type COFIM industry machines, are equipped with slanted contact bearings for fast rotations with no play for optimal use of carbide inserts. PIPE CUTTING & BEVELLING MACHINE Cutting, bevelling and counter-bore a tube in the best conditions...

219mm - 1800mm 4" - 73" CTO CAN BE EQUIPPED WITH: 01 • Counterboring attachment 02 • Concentric clamping device 03 • OD ovality carriage 04 • Single point carriage ID and bevel Single point machining for thick wall up to 150mm Kit of 10cm extension PIPE CUTTING & BEVELLING MACHINE EXTERNAL CLAMPING FEATURES • Perpendicular cut • Able to machine thick wall pipe up to 110mm • Cut and bevel simultaneously • Internal bevel or internal machining with accessory ✓TOOL 0 HOLDER • 45mm stroke • Star wheel system • Tool holders available: - 70mm stroke - 110mm stroke To use with hydraulic pack Speed...