StakGard Continuous Dust Monitor Product Data Sheet Total Solutions - Total Confidence Doc i/d : 090008 Issue : A Rev. : Date : 10/3/09 © 2009 CODEL International Ltd. We reserve the right to modify designs without prior notice. CODEL robust, reliable & suitable for all particulates easy installation, low maintenance well-proven technology, accurate sensing method adaptable; suitable for virtually all dust collectors wide range of duct sizes from 250mm to 2m damping system to prevent false alarms direct sensing method; actual particulate concentration StakGard Continuous Dust Monitor The Stakgard continuous dust monitor uses the well-proven tribo-electric effect to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and present it to the operator via a unique modulating LED display. StakGard incorporates an adjustable damping system that increases the response time of the alarm and analogue circuits and so prevents false alarms. The StakGard indicative particulate monitor is designed specifically to meet the needs of operators that require robust, reliable and accurate indicative monitoring to standards acceptable both nationally and internationally.

CODEL International Ltd. Station Building, Station Road Bakewell, Derbyshire DE45 1GE England Tel: +44 (0) 1629 814 351 Fax: +44 (0) 8700 566 307 e-mail: [email protected] web site: www.codel.co.uk Distributor : Overall Unit Dimensions Specification Damping : 6-way rotary switch (5/20/40/80/120/sec) Power : 85/265V AC Requirement Mains : 3-way plug and socket Connector Probe Material : 316 stainless steel Probe Lengths : 250, 500, 750 & 1000mm Options : remote digital display unit with alarm LED : AlarmGard remote annunciator with klaxon and xenon lamp General Enclosures : aluminium casting,...