D 037 7-A | J U N E 2016 This document must not be copied,either completely or in part, without our permission. Any infringement will lead to legal proceedings. Cobolt AB Heat sink with fans for high power lasers To ensure operation within given specifications and Thermal resistance HS-04 is suitable for use with laser models: Cobolt Zouk 05-01 Cobolt CalypsoTM 05-01 Cobolt SambaTM 05-01 Cobolt JiveTM 05-01 Cobolt FlamencoTM 05-01 Cobolt RumbaTM 05-01 Cobolt TorTM Cobolt OdinTM for the warranty to be valid, the Laser Head must be attached to a heatsink providing good thermal resistance. This value is the difference between the maximum operating laser base plate temperature (50˚C) and the maximum ambient temperature at the air-heatsink interface (40°C), divided by the maximum power dissipated from the laser head (~50W). The mounting surface should be flat (within 0.05 mm over mounting surface). It is recommended to use a thermal heat compound between the laser head and the heat sink to provide good thermal contact. Denna handling får ej utan vårt medgivande delges annan, kopieras eller eljest obehörligen användas. Överträdelse härav beivras med stöd av gällande lag. Cobolt AB Cobolt model number Power supply included Cobolt AB | Solna, Sweden | PHONE +46 8 545 912 30 | FA X +46 8 545 912 31 | E-MAIL [email protected] | www.cobolt.se The heatsink superceeds HS-02 and is designed to accommodate all Cobolt laser model 05-01 Series footprints and can be Note: 1. This product must be compliant to RoHS2 Directive 2011/65/EU bolted to a standard metric optical table. Excerpt from ISO 2768-m 0,5-6 (6)-30 (30)-120 (120)-400 (400)-1000 Date (YYYY-MM-DD) Unless otherwise stated Fillet radii Edges broken Surface treatment