• Small Scale R2R Unit: The Smartcoater is designed for small roll-to-roll (R2R) trial runs, making it easy to use and cost-effective due to the minimal amount of inks required.
• Reproducible Results: Ensures scalable research and development with consistent outcomes.
• Multilayer Capability: Can run backwards, allowing for multilayer applications in a short time.
• Safe Operation: EEx operation on a small scale, suitable for use in a standard glove box and can be operated in a nitrogen atmosphere.

• Integrated Functions: Combines continuous R2R coating, printing, and lamination in one unit.
• Dimensions: 1260 mm x 850 mm x 1750 mm (LxWxH) with a working width of 100 mm and speed range of 0.1 – 1 m/min.
• Application Systems: Features a 5-in-1 application system including knife, dip, engraved, slot die, and micro roller systems.
• Drying Capability: Equipped with a 300 mm electrical heated air dryer with a maximum temperature of 235 °C and power of 9 kW.
• Tension Control: Includes a tension control system with load cell and Siemens S7 system, with motor-driven unwinding and rewinding.
• Power Requirements: Operates on 400 V / 50 Hz / 32 A.

Coatema Coating Machinery GmbH, Roseller Straße 4, D-41539 Dormagen, Germany. Tel.: +49 (0) 21 33 / 97 84 - 0, Fax: +49 (0) 21 33 / 97 84 - 170, E-Mail: [email protected], Internet: www.coatema.de

© Copyright: Coatema Coating Machinery GmbH. All rights reserved. Technical alterations reserved. Liability for misprints excluded.