A2RC Cable Gland
1Pages

{{requestButtons}}

Catalog excerpts

A2RC Cable Gland - 1

CMP PRODUCTS CABLE GLAND CATALOGUE CMP INDUSTRIAL CABLE GLAND PRODUCTS TECHNICAL DATA Design Specification A2RC Industrial Cable Gland with Conduit Connection Facility Mechanical Classifications* Impact = Level 8, Retention = Class D For all types of Unarmoured Cables Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only Ingress Protection Rating Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium Seal Material Cable Type Sealing Technique CMP Unique Displacement Seal Concept Sealing Area(s) Cable Outer Sheath • Designed for rigid & flexible conduits • Easy install running coupler design • Displacement type seal • Designed to prevent Coldflow • -60˚C to +130˚C Note: Alternative conduit sizes available upon request. See cable gland selection table below for full NPT & Metric thread ordering references THREAD OPTION ORDERING EXAMPLES Ordering Reference Male Thread Female Thread Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444 Note : ** Refer to page 7 or www.cmp-products.com for further information on Ingress Protection Ratings Cable Gland Selection Table Refer to illustration at the top of the page Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Standard Option Thread Thread Length Metric NPT Length (NPT) NPT (Metric) “E” “E” Overall Cable Diameter “A” Min Combined Ordering Reference Female Protrusion (*Brass Metric male & female) Conduit Length Connection “F” Ordering “G” Size Type Suffix Cable Gland Weight (Kgs) *For material options add the following suffix to the Ordering Reference; Brass (no suffix required); Nickel Plated Brass ‘5’; 316 Grade Stainless Steel ‘4’; Copper Free Aluminium ‘1’ For NPT male and / or female options please add the following digits to the material suffix (See Thread Options table above) ; 1/2” = 31, 3/4” = 32, 1” = 33, 1 1/4” = 34, 1 1/2” = 35, 2” = 36, 2 1/2” = 37, 3” = 38, 3 1/2” = 39, 4” = 310 (Brass requires prefix “0”) When NPT male & Metric female product option is required, please add the following digits to the material and NPT male suffix (See Thread Options table above) ; M20 = 01, M25 = 02, M32 = 03, M40 = 04, M50 = 05, M63 = 06, M75 = 07, M90 = 08 (Brass requires prefix “0”) Examples: 32A2RC1RA533 = Nickel Plated Brass M32 male x 1” NPT female, 20S16A2RC1RA031 = Brass M20 male x ½” NPT female, 25A2RC1RA43202 = Stainless Steel ¾” NPT male x M25 female, 220A2RC1RA5 =

Open the catalog to page 1

All CMP Products catalogs and technical brochures

  1. E1FX/M

    1 Pages

  2. A2FHC

    1 Pages

  3. A2F/MF

    1 Pages

  4. A2F/M

    1 Pages

  5. A2F100

    1 Pages

  6. CMP TRITON

    6 Pages

  7. Rapid EX NEW

    12 Pages

Archived catalogs