CMP PRODUCTS CABLE GLAND CATALOGUE 650 Exd H B<te’ A2F/HC Mining & Overground, Internationally Approved, Explosive Atmosphere Cable Gland TECHNICAL DATA For all types of Unarmoured Cables housed in Flexible Hose • External Hose connection facility • Approved for Group I & Group II • High quality durable materials • Wide sealing range for each cable gland size • Displacement type flameproof seal • -60"C to +130*0 • Internationally marked, lECEx & ATEX Available for Group I & II use Contact CMP for specific Group I & II Certification Design Specification Cable Gland Selection Table Refer to illustration at the top of the page. BS 6121:Part 1:1989, IEC 62444, EN 62444 Impact = Level 8, Retention = Class B IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only SIRA13ATEX1068X, SIRA13ATEX4074X © Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da (Group II) © Ex d I Mb, Ex e I Mb (Group I) EN 60079-0,1,7,15,31 IECEx SIR 13.0023X, IECEx SIM 14.0006 Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da (Group II) Ex d I Mb, Ex e I Mb (Group I) IEC 60079-0,1,7,15,31 TC C-GB. 05.B00138 (Group II) 13-GA4B0-0748X, 13-GA4B0-0749X, 13-GA4B0-0750X (Group II) P333688 (Group II) GYJ13.1140X / GYJ13.1 282X (Group II) TUV 12.0878X (Group II) IP66, IP67 & IP68 (when used with CMP Products installation accessories)** DTS01 : 91 Electroless Nickel Plated Brass (standard), Stainless Steel, Aluminium CMP SOLO LSF Halogen Free Thermoset Elastomer Unarmoured & enclosed within hose for mechanical protection CMP Displacement Seal Cable Outer Sheath * Mechanical & Electrical Classifications applied as per /EC 62444 & EN 62444 ** Refer to page 7 or www.cmp-products.com for further information on Ingress Protection Ratings Cable Gland Size *For material options add the following suffix to the Ordering Reference; Brass (no suffix required); Nickel Plated Brass '5'; 316 Grade Stainless Steel '4'; Copper Free Aluminium '1' For NPToptions please add the following digits to the material suffix; 1/2" = 31, 3/4" = 32, 1" = 33, 1 1/4" = 34, 1 1/2" = 35, 2" = 36, 2 1/2" = 37, 3" = 38, 3 1/2" = 39 (Brass requires prefix "0") Examples: 32A2FHC321RA534 = Nickel Plated Brass 1-1/4" NPT, 50SA2FHC511RA035 = Brass 1-1/2" NPT, 25A2FHC251RA432 = Stainless Steel 3/4" NPT, 20A2FHC191RA5 = Nickel Plated Brass M20 Dimensions are displayed in millimetres unless otherwise stated