CMP PRODUCTS CABLE GLAND CATALOGUE CMP EXPLOSIVE ATMOSPHERES PRODUCTS A2F100 Globally Approved, Explosive Atmosphere Cable Gland For all types of Unarmoured & Braided Cables Complies 100% with IEC 60079-0 cable retention requirements No external cable clamping required No special conditions for safe use Displacement type seal Deluge protected -60"C to +130"C Globally marked, lECEx, ATEX TECHNICAL DATA * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444 ** Refer to page 7 or www.cmp-products.com for further information on Ingress Protection Ratings Cable Gland Selection Table Refer to illustration at the top of the page. Dimensions listed below are for metric cable glands only Dimensions for alternative threads may vary, please see supplementary technical data sheet Cable Gland Size *For material options add the following suffix to the Ordering Reference; Brass (no suffix required); Nickel Plated Brass '5'; 316 Grade Stainless Steel '4'; Copper Free Aluminium '1' NPToptions add the following digits to the material suffix (NPT& Metric threads only available)' 1/2" = 31' 3/4" = 32' 1" = 33' 1 1/4" = 34' 1 1/2" = 35' 2" = 36' 2 1/2" = 37' 3" = 38' 3 1/2" = 39'4" = 310 (Brass requires prefix '0') Examples: 32A2F1001RA534 = Nickel Plated Brass 1-1/4" NPT, 50SA2F1001RA035 = Brass 1-1/2" NPT, 25A2F1001RA432 = Stainless Steel 3/4" NPT, 20A2F1001RA5 = Nickel Plated Brass M20 Dimensions are displayed in millimetres unless otherwise stated