CMP PRODUCTS CABLE GLAND CATALOGUE CMP FLAT FORM CABLE PRODUCTS TECHNICAL DATA Design Specification Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only Ingress Protection Rating Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium Seal Material Cable Type Flat Form Unarmoured & Braided Sealing Technique CMP Unique Displacement Seal Concept Sealing Area(s) For all types of Flat-Form Unarmoured & Braid Armoured Cables Deluge Protection Compliance A2-FF Single Seal, Flat-Form Industrial Cable Gland Cable Outer Sheath • Designed for flat form / heat trace cables • Displacement type seal • Designed to prevent Coldflow • Deluge protected • -60˚C to +130˚C (standard), -20˚C to 200˚C (ThermIn option) Flat-form seals available for alternative Cable Glands upon request Note : * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444 Note : ** Refer to page 7 or www.cmp-products.com for further information on Ingress Protection Ratings Cable Gland Selection Table Refer to illustration at the top of the page Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Standard Option Thread Thread Length NPT Length (NPT) NPT (Metric) “E” “E” Overall Cable Diameter “A” (h x w) Combined Ordering Reference (*Brass Metric) Size Ordering Suffix Cable Gland Weight (Kgs) *For material options add the following suffix to the Ordering Reference; Brass (no suffix required); Nickel Plated Brass ‘5’; 316 Grade Stainless Steel ‘4’; Copper Free Aluminium ‘1’ For NPT options please add the following digits to the material suffix ; 1/2” = 31, 3/4” = 32, 1” = 33 Examples: 25A2FF1RA432 = Stainless Steel 3/4” NPT, 20A2FF1RA5 = Nickel Plated Brass M20 Dimensions are displayed in millimetres