WATER VALVES
WATER VALVES
This document provides detailed descriptions and applications of various types of valves and penstocks manufactured by C.M.O. for water management systems. The products are designed for use in sewage treatment plants, water dams, and hydroelectric power plants, among other applications.
- Product Description: Wall fitting gate available in square, rectangular, or round sections with EPDM or Brass + EPDM sealings. Constructed from carbon steel or stainless steel.
- Applications: Primarily used in sewage treatment plants and for controlling fluids in tanks and piping outlets.
- Product Description: Gate for open channels with three-sided tightness. Made from carbon steel or stainless steel.
- Applications: Used in sewage treatment plants for fluid regulation in channels.
- Product Description: Similar to channel type gates with three-sided tightness, designed for overflow control.
- Applications: Controls fluid levels in tanks and discharges floating solids and foams.
- Product Description: Check valve for pipe ends, available in various shapes and constructed from carbon steel, stainless steel, or cast iron.
- Applications: Prevents fluid backflow at pipeline ends.
- Product Description: Rolling wall-fitting gate with four-sided seal, designed for large sizes or water heights.
- Applications: Controls fluids in large ducts.
- Product Description: Flanged butterfly valve with single or double eccentricity, available in sizes DN 50 to DN 2000.
- Applications: Used in hydroelectric power plants and water pumping applications.
- Product Description: Valves with hydraulic cylinders, designed for submerged operation.
- Applications: Water discharge control in dams.
- Product Description: Square or rectangular valves with hydraulic actuation, designed for 50 mWC pressure.
- Applications: Water control in dams, often used in pairs for safety and maintenance.
- Product Description: Valves with hydraulic cylinders, designed for flow speed reduction and level regulation.
- Applications: Installed in water dams for flow control.
- Product Description: Valves with motor or manual gear actuation, designed for flow speed reduction.
- Applications: Used in water dams for flow control.
- Product Description: Radial gates for surface or bottom applications, constructed from carbon steel.
- Applications: Fluid level control and water discharge in dams.
- Product Description: Hinged gates with gyratory axles, available in channel bottom (GI) or upper side (GS) configurations.
- Applications: Flow regulation and level control in channels.
Catalog excerpts
VALVES AND PENSTOCKS FOR WATER C.M.O. Amategui Aldea 142, 20400 Txarama-Tolosa (SPAIN) Phone: + 34 902 40 80 50 / Fax: + 34 902 40 80 51 / [email protected] http://www.cmo.es
Open the catalog to page 1
OVERFLOW GATES FLAP VALVES PRODUCT DESCRIPTION Check valve to be installed at the end of pipe. Standard working pressure 2,5 meters Round, square or rectangular welded construction. Manufacturding materials: carbon steel or stainless steel. Cast iron construction for small sizes. Tightness by EPDM seat. Two types of design are available: - Straight seat / straight disk. - Inclined seat / straight disk. GENERAL APPLICATIONS Valve to be fixed at the end of a pipeline. The fixing way can be flanged or prepared to installation in concrete. Its design avoids to the fluid to return in the opposite...
Open the catalog to page 4
VALVES FOR WATER PRODUCT DESCRIPTION Manufacturing range: from DN50 up to DN2500 (bigger sizes under request) Standard construction with body and sleeve in carbon steel with stainless steel sliding side. Sealing between stainless steel and EPDM joint. Standard actuator: Two hydraulic cylinders (one on each side). Other options available like electric actuator. The valve is controled by and hydraulic power unit and an electrical panel. Remote and local controls available. The valve can be designed to work submerged. APPLICATION Installation in water dam for water discharge control. Function: Eliminate...
Open the catalog to page 7
VALVES FOR WATER PRODUCT DESCRIPTION Square or rectangular construction manufactured in carbon steel as standard. The dimensions of the valve can be completely adapted to the customer requirements. As standard designed for 50 mWC with posibility to be designed for higer or lower pressures. The gate is actuated by an hydraulic cylinder. As an option, an hydraulic or mechanical locking device can be installed to fix de gate in open position. An indication rule, by pass system and aireation piping is included in the valve. The hydraulic actuator is controled by an hydraulic power unit and an electrical...
Open the catalog to page 8
VALVES FOR WATER PRODUCT DESCRIPTION Standard construction with body and sleeve in carbon steel with stainless steel sliding side. Sealing between stainless steel and EPDM joint. Standard actuator: Two hydraulic cylinders (one on each side). Other options available like electric actuator. The valve is controled by and hydraulic power unit and an electrical panel. Remote and local controls available. APPLICATION Installation on line in water dams for water flow control mainly to reduce water speed Function: Flow speed reduction on line, also used as level regulator at big water deposits normally...
Open the catalog to page 9
VALVES FOR WATER PRODUCT DESCRIPTION Inside of our manufacturing range there are two different types of radial gates: a) Surface type Radial gate tight is 3 sides (bottom and sides). Manufactured in carbon steel with welded construction according to the customer requirements. Radial opening and closing againts a turning shaft. Actuators: hydraulic, electric ... b) Bottom type Radial gate tight in 4 sides. Manufactured in carbon steel with welded construction according to the customer requirements. Radial opening and closing againts a turning shaft. Actuators: hydraulic, electric ... APPLICATION...
Open the catalog to page 10
GIRATORY GATES
Open the catalog to page 11All C.M.O. catalogs and technical brochures
MINING16 Pages
KNIFE GATE VALVES14 Pages
DAMPERS CATALOG5 Pages
C.M.O. PRODUCTS16 Pages
2013 catalogue11 Pages
A SERIES20 Pages
Archived catalogs
KNIFE GATE VALVES AB Series12 Pages
AT Series - Water gate5 Pages
VALVES FOR GASES MP Series4 Pages
TE Series - Telescopic valve2 Pages
KNIFE GATE VALVES A Series14 Pages
KNIFE GATE VALVES A_Lug Series11 Pages
