DAMPERS CATALOG
5Pages

VALVES AND DAMPERS FOR AIR & GASES

VALVE FOR GASES PRODUCT DESCRIPTION Round Damper guillotine type GR manufactured by CMO is especially useful as an element of isolation to allow inspections, maintenance and repairs on the pipes. The basic mechanical elements that make up the guillotine type of damper GR, is a rack or foreign body that contains a piece that moves inside lengthwise, a sealing peripherical to prevent leakage of gas in all phases of the movement of the knife of gate, necessary supports and an actuator GENERAL APPLICATIONS This damper knife gate valve is appropriate for a wide range of air & gases...

VALVE FOR GASES PRODUCT DESCRIPTION GENERAL APPLICATIONS Flanged or wafer butterfly damper valve. Cast or welded body and disc depending the diameter of the valve. Manufactured with different kinds of tightness depending the customer requirements (100% tight, 99,5% tight o 98,5% tight). Fabrication materials: S275JR carbon steel, HII carbon steel, 16MO3 carbon steel, different stainless steel qualities (aisi 304, 316, 310 ...). Depending the application. Pneumatic transports, exhaust gas control on chimneys, exhaust gas control on combustion proccesses, gas turbina exhaust gas control ......

VALVE FOR GASES PRODUCT DESCRIPTION GENERAL APPLICATIONS Flanged light butterfly, square, rectangular louvred type, several blades.. Welded construction body and disc. Manufactured with different kinds of tightness depending the customer requirements (100% tight, 99,5% tight o 98,5% tight). Fabrication materials: S275JR carbon steel, HII carbon steel, 16MO3 carbon steel, different stainless steel qualities (aisi 304, 316, 310 ...). Depending the application. Pneumatic transports, exhaust gas control on chimneys, exhaust gas control on combustion proccesses, gas turbina exhaust gas control...

PRODUCT DESCRIPTION Specially designed to be mounted in installations for transport of solids of fine grain as cement, ash, sand, etc In all type of industry with pneumatic transport, by pipes with flanges or in inlets and outles of silos. The normal in 2 this kind of work where the standard pressures are from 0 to 2kg/cm . Other pressures to be discussed. Construction: Body in cast iron, steel, stainless steel, etc. Seat: metal/metal - Aisi 304 + stellite metal/rubber - Aisi 304 + EPDM Shafts: Aisi 304 Tightness to the outside, depending on the temperature and working conditions....