Website:
CME Technology Co., Ltd.
Catalog excerpts
KRD30 Constant Acceleration Tester (Box Type) KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment (except gravity), whether the structure adaptability and performance are good, and obtain the units’ electrical parameters. Constant acceleration test can also be used to determine the influence of constant acceleration on electronic devices. Its purpose is to show structural and mechanical defects that may not be detected during shock and vibration tests. It can also be used as a high-stress test to determine the structural strength limits of packages, internal metallization and lead systems, chip or back cover attachment capacity and other components of electronic devices. Control Mode: Fully closed-loop digital network (remote) automatic control + manual control Installation Condition: Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment
Open the catalog to page 1
Schematic and physical drawings KRD30-03/05 Driving principle diagram of constant acceleration tester Reference turntable Transmission principle diagram of tester Reference small-arm fixture Schematic diagram of constant acceleration tester Various special turntables Add.: No.3 Upgrade Demonstration Base, West of Yongchang Rd., High-tech Zone, Xianyang City, Shaanxi Province, 712023 China
Open the catalog to page 2
Overall Dimension (mm): 1100×1100×1200 Acceleration (g): 1~500 Installation Radius (mm): 200 Max. Height for Specimen (mm): 200 Weight (kg): 1000 30-03 Collector Ring: Optional according to user requirements KRD30-10/20 Overall Dimension (mm): 1650×1350×1100 Acceleration (g): 1~100 Installation Radius (mm): 500 Max. Height for Specimen (mm): 300 Weight (kg): 1500 Continues worktime (min): 60 Collector Ring: Optional according to user requirements KRD30-2M/3M/4M/8M Overall Dimension (mm): 1000×1000×1200 Acceleration (g): 200-20K/200-30K/200-40K/200-80K Installation Radius (mm): 130 Max....
Open the catalog to page 3
Technical Specifications Model KRD30－3 Parameters Max. Load (kg) ×Position Max. Height for Specimen (mm) Installation Radius (mm) Test Direction Continues Worktime Accuracy (%) Overall Dimension Optional according to user requirements Power Supply Control Mode Fully closed-loop digital network (remote) automatic control + manual control The current collector and the control precision can be in accordance the related standards or customer requirements Working Environment Standards Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the...
Open the catalog to page 4
