MECHANICAL TESTING SOLUTIONS KRD30 series constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment (except gravity), whether the structure adaptability and performance are good, and obtain the units' electrical parameters. Advanced control system: Full-automatic computer remote real-time control interface. The operator only needs to input simple values to start the equipment and complete the acceleration test accurately. User-friendly display interface: the control interface can display the test curve, tolerance and test time in real time. Powerful multi-acceleration continuous test system: It can realize multi-level acceleration continuous test according to the different requirements of the test sample. Reliable protection measures: open circuit, over-limit and over-speed protection can be realized. Multiple control methods: In the case of automatic control failure or no need of automatic control, the device can still use manual control to complete the test. Convenient and quick result output system: After the test, the test report is automatically generated and printed out. Note: 1. The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail. 2. In addition to providing electrical signals, the slip ring can also optionally add transmission functions such as oil, gas, special signals, Ethernet, and RF signals.