1. Catalogs
  2. CME Technology Co., Ltd.
  3. KRD14 Pneumatic Vertical Shock Response Spectrum Testing Machine

KRD14 Pneumatic Vertical Shock Response Spectrum Testing Machine

KRD14 Pneumatic Vertical Shock Response Spectrum Testing Machine

Product catalog summary
Overview
The KRD14 series pneumatic shock response spectrum tester is designed to assess the shock resistance of electrical and electronic products or packaging. It evaluates the reliability and structural integrity of products in shock environments by simulating shock waves and energy.

KRD14 Pneumatic Vertical Shock Response Spectrum Test System
- Table size: 1200mm, capable of withstanding a 1000kg load.
- Features a Windows-based stable control system with a full-automatic remote-control interface.
- Built-in SRS specifications and tolerances for easy adjustment and application.
- Automatically completes tests and generates reports.
- Compact and easy to install.
- Adjustable driving shock energy via air pressure for convenient operation and high efficiency.

Technical Specifications
  • Load Capacity: Ranges from 5,000 kg to 50,000 kg depending on the model.
  • Table Size: Varies from 300x300 mm to 1200x1200 mm.
  • Power: 1-phase AC220V±10% 50Hz.
  • Air Source: ≤1MPa.
  • Installation Condition: Foundation-free, requires a leveled cement floor with a working distance of 800-1000mm around the equipment.
  • Weight: Ranges from 3240 kg to 5000 kg.
  • Standards: Complies with MIL-STD-810.
  • Working Environment: Temperature range 0-40℃, Humidity ≤ 80% (non-condensing).
  • Response Frequency Range: 10-10000 Hz.
  • Max. Response Acceleration: 2000 g.
  • Tolerance Range: ±6-9 dB.
  • Overall Dimension: Varies by model, from 1300x850x1500 mm to 2200x1500x2000 mm.
  • Gradient of Rising Stage: 6-9 dB/Otc.

Note: The parameters provided are for reference only; final specifications are subject to agreement between the supplier and buyer.
See more

Catalog excerpts

KRD14 Pneumatic Vertical Shock Response Spectrum Testing Machine-1

MECHANICAL TESTING SOLUTIONS KRD14 PNEUMATIC VERTICAL SHOCK RESPONSE SPECTRUM TEST SYSTEM A KRD14 series pneumantic shock response spectrum tester is used to measure and determine the shock resistance of electrical and electronic products or packaging, and to evaluate the reliability and structural integrity of the test product in a shock environment. The shock response spectrum is the total result of a series of single-de-gree-of-freedom linear systems with different natural frequencies subjected to the same shock excitation response. When a product is subjected to an impact, the maximum value of its impact response means that the product has a maximum stress. Therefore, the shock response spectrum tester can better simulate the shock wave and shock energy suffered in the real environment. 1200mm table size withstand 1000kg load. Q Windows-based stable control system, full-automatic remote-control interface. The equipment takes up a small area and is easy to install. The control & measurement system has built-in SRS specifications and tolerances, which is convenient for users to adjust and apply. It automatically completes the test and generates reports. Adjust the driving shock energy by adjusting the air pressure, which is convenient to operate and high in efficiency. TECHNICAL SPECIFICATIONS Mode Parameters''''''''''''''--..^ Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail.

 Open the catalog to page 1

All CME Technology Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.