Website:
CME Technology Co., Ltd.
Catalog excerpts
MECHANICAL TESTING SOLUTIONS KRD12 PNEUMATIC HORIZONTAL SHOCK TEST SYSTEM A KRD12 series shock test system is used to measure and determine the horizontal impact resistance of a product or package, and to evaluate the reliability and structural integrity of the test unit in a horizontal impact environment. The system can perform conventional half-sine wave, post-peak sawtooth wave, or trapezoid wave shock test to realize the shock energy that the product is subjected to in the actual environment, thereby improving the product or packaging structure. Windows-based stable control system IPS-2000 shock control & measurement system can accurately complete the high energy shock test Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free. Mod' Parameters Rated Load (kg) Table Size (mm) Half-Sine Post-Peak Sawtooth Trapezoid Half-Sine Pulse Duration Post-Peak Trapezoid Bump Waveform (Optional) Peak Acceleration (g) Pulse Duration (ms) Bump Rate _(Times/Min) Overall Dimension (mm) Weight (kg) Working Environment Power Air Source Installation Condition Standards TECHNICAL SPECIFICATIONS Temperature range 0 ~ 40°C, Humidity < 80% (non-condensing) 1-phase AC220V±10% 50Hz <1 MPa Special foundation, foundation-free base is optional.The working distance of 800-1000mm shall be reserved around the equipment. MIL-STD-810 IEC68-2-27 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 IS012405-3 UL2580 Note: I.The parameters in the table are for reference only, and the parameters agreed up<ph by the supplier and the buyer s 2. Bump fundtion. Post-peak Sawtooth and Trapezoid waveforms are optional ^ Trapezoidal guide shafts: large supporting force, good lubricity and full-automatic positioning table. Automatic control of shock speed: the shock overload value is achieved by adjusting the air pressure. After the cylinder pressure is set, system will automatically control the shock speed with high accuracy and good repeatability. Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter. Easy installation: free-foundation base is optional, due to short driving stroke of the pneumatic cylinder, the footprint is small. The driving cylinder enables the table to obtain the required energy, decelerates as buffers, and automatically resets. Once the shock action is completed, the reset cylinder pulls the table to reset and enters the next shock preparation state. Integrated control & measurement system: the system comes with a variety of waveform tolerance bands that comply with the MIL-810 standard, automatically generates test reports after the test is completed. Multiple waveforms: can perform conventional half-sine waves, post-peak sawtooth waves, or trapezoid waves. System scalability: the system can be designed as a bidirectional shock according to user needs, saving test time more effectively.
Open the catalog to page 1
MECHANICAL TESTING SOLUTIONS €CME KRD13 HIGH ENERGY SHOCK TEST SYSTEMTECHNICAL SPECIFICATIONS KRD13 series high energy shock test sytem is specially designed to meet the requirements of military industry and automotive industry. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke. This equipment combines classical free-fall shock and pressuried shock into one, can acheive higher shock energy than free-fall shock method. Windows-based stable control system...
Open the catalog to page 2
