- Catalogs
- CME Technology Co., Ltd.
- CME Pneumatic Shock testing machine KRD11
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
CME Pneumatic Shock testing machine KRD11
CME Pneumatic Shock testing machine KRD11
- Pneumatic drive with a simple structure and high reliability.
- Maximum shock rate of up to 120 times per minute.
- Capable of impact testing for small pulse durations as low as 0.3ms.
- High acceleration shock testing machine.
- Ability to achieve large shock pulse width and small overload tests.
- Faster shock rate compared to motor or hydraulic-driven bump tables, offering higher reliability and better bump waveform.
- Shock speed and rate can be controlled by adjusting gas pressure.
- IPS-2000 shock control and measurement system supports manual, continuous, single, and interval shocks.
- Built-in brake mechanism ensures operational safety.
- Models range from KRD11-5 to KRD11-2000, with rated loads from 5kg to 2000kg.
- Table sizes vary from 150x150mm to 1500x1200mm.
- Peak acceleration ranges from 5g to 3000g depending on the model.
- Pulse duration for half-sine waveform ranges from 0.4ms to 60ms.
- Optional bump function, post-peak sawtooth, and trapezoid waveforms available.
- Operating temperature range: 0 to 40°C, with humidity ≤80% (non-condensing).
- Power supply: 1-phase AC220V±10% 50Hz.
- Air source pressure: ≤0.8MPa.
- Installation requires a leveled cement floor with a working distance of 800-1000mm reserved around the equipment.
Catalog excerpts
Technical Specifications KRD11 Series Pneumatic Vertical Shock Test System
Open the catalog to page 1
Web: www.creditcme.com Email: [email protected] KRD11 series pneumatic vertical shock test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and bump test, can perform conventional half sine wave, post half-sine post-peak sawtooth wave, square wave and other waveform shock tests. Pneumatic drive, simple structure and high reliability, without hydraulic leak risk. Maximum shock rate up to 120 times / min. Impact testing for small pulse lower to 0.3ms Shock...
Open the catalog to page 2
Web: www.creditcme.com Email: [email protected] (Optional) Bump Peak Acceleration Duration (ms) Bump Rate (Times/Min) Overall Dimension (mm) Weight (kg) Temperature range 0 ~ 40 40℃, Humidity≤80% (non-condensing) condensing) Environment Power Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be free, reserved around the equipment Note: 1. The parameters in the table are for reference only, and the parameters agreed upon by the supplier parameters and the buyer shall prevail. 2. Bump function, Post-peak Sawtooth and Trapezoid waveforms are optional....
Open the catalog to page 3All CME Technology Co., Ltd. catalogs and technical brochures
- Test stand
- Automated testing machine
- Material test machine
- Computer-controlled test machine
- Compression testing machine
- Digital tester
- Industrial testing machine
- Vertical testing machine
- Automated test bench
- Automatic tester
- Industrial tester
- Laboratory testing machine
- Universal testing machine
- Precision testing machine
- Research and development testing machine
- Electromechanical testing machine
- Quality control testing machine
- Hydraulic testing machine
- Fatigue testing machine