- Catalogs
- CME Technology Co., Ltd.
- CME Constant Acceleration testing machine KRD30
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
CME Constant Acceleration testing machine KRD30
CME Constant Acceleration testing machine KRD30
- Advanced Control System: Features a semi-automatic computer remote real-time control interface that simplifies operation by requiring only basic input values to start and complete tests.
- User-Friendly Interface: Displays test curves, tolerances, and test times in real-time.
- Multi-Acceleration Testing: Capable of conducting multi-level acceleration continuous tests tailored to different sample requirements.
- Reliable Protection: Includes open circuit, over-limit, and over-speed protection measures.
- Flexible Control Methods: Offers manual control options in case of automatic control failure or when not needed.
- Efficient Result Output: Automatically generates and prints test reports post-testing.
- Models: KRD30-3, KRD30-5, KRD30-10, KRD30-20, KRD30-2M, KRD30-3M, KRD30-4M, KRD30-8M.
- Max Load: Ranges from 3x6 kg to 20x2 kg depending on the model.
- Acceleration: Ranges from 1 to 500 g, with some models reaching up to 80k g.
- Max Height for Specimen: 200 mm to 300 mm.
- Installation Radius: 200 mm to 500 mm.
- Test Direction: Includes ±X, ±Y, ±Z.
- Launch/Stop Time: ≤3 minutes for most models.
- Continuous Worktime: 60 minutes.
- Acceleration Accuracy: ±X, ±Y, ±Z.
- Overall Dimensions: Varies by model, e.g., 1100x1100x1200 mm for KRD30-3.
- Weight: Ranges from 1000 kg to 1500 kg.
- Power Supply: 3-phase AC380V±10% 50Hz.
- Control Mode: Fully closed-loop digital network with both automatic and manual control.
- Installation Condition: Foundation-free, requires a leveled cement floor with a working distance of 800~1000 mm.
- Working Environment: Temperature range of 0~40°C, humidity ≤80% (non-condensing).
- Parameters are for reference; final specifications are agreed upon by the supplier and buyer.
- Collector ring can optionally include transmission functions for oil, gas, special signals, Ethernet, and RF signals.
Catalog excerpts
Technical Specifications KRD30 Series Constant Acceleration Tester (Box Type Type)
Open the catalog to page 1
Web: www.creditcme.com Email: [email protected] KRD30 series centrifugal constant acceleration test machine is used to evaluate when components, equipment and other electrical and electronic products are subjected to constant acceleration environment (except gravity), whether the structure adaptability and performance are good, and obtain the units’ electrical parameters. Advanced control system: Full : Full-automatic computer remote real-time control interface. The operator time only needs to input simple values to start the equipment and complete the acceleratio test accurately....
Open the catalog to page 2
Web: www.creditcme.com Email: [email protected] Control Mode Fully closed loop digital network (remote) automatic control + manual control closed-loop Foundation-free, the cement floor shall be leveled and the working distance of 800 free, 800~1000mm shall be reserved Working Environment Standards Temperature range 0 0～40℃, Humidity≤80% (non-condensing) condensing) MIL-STD-810F Note: 1. The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail. 2. In addition to providing electrical signals, the collector ring can also optionally...
Open the catalog to page 3All CME Technology Co., Ltd. catalogs and technical brochures
- Test machine
- Test stand
- Material test machine
- Automated testing machine
- Computer-controlled test machine
- Compression testing machine
- Digital tester
- Industrial testing machine
- Vertical testing machine
- Automated test bench
- Automatic tester
- Industrial tester
- Laboratory testing machine
- Universal testing machine
- Precision testing machine
- Research and development testing machine
- Electromechanical testing machine
- Quality control testing machine
- Hydraulic testing machine
- Fatigue testing machine