1. Catalogs
  2. CME Technology Co., Ltd.
  3. CME Bump testing machine KRD20

CME Bump testing machine KRD20

CME Bump testing machine KRD20

CME Bump testing machine KRD20

Product catalog summary
Overview: The KRD20 series pneumatic bump test machine by CME Technology Co., Ltd. is designed to replace traditional mechanical cam systems. It is used for repeated impact testing on electronic components and products during transportation or operation. The machine is fully pneumatic, offering environmental benefits, repeatability, and reliability.
Key Features:
  • Fully pneumatic driven, ensuring a clean and environmentally friendly operation.
  • Adjustable gas pressure to control collision frequency for continuous high collisions.
  • Automatic stop feature after the test is completed.
Technical Specifications:
  • Models and Load Capacity: Ranges from KRD 20-50 (50 kg) to KRD 20-3000 (3000 kg).
  • Table Size: Varies from 500×500 mm to 2500×2500 mm depending on the model.
  • Shock Waveform: Half sine waveform with peak acceleration ranging from 3 g to 150 g.
  • Pulse Duration: Between 2 ms to 30 ms.
  • Bump Rate: From 1 to 120 times per minute.
  • Power Supply: 1-phase AC220V±10% 50Hz.
  • Air Source: ≤0.8Mpa.
  • Working Environment: Temperature range 0 ~ 40℃, Humidity ≤80% (non-condensing).
  • Standards: Complies with MIL-STD-810 and IEC68-2-29.
Additional Information: The parameters provided are for reference only, and final specifications should be agreed upon between the supplier and the buyer.
Contact Information: CME Technology Co., Ltd., No.3 Upgrade Demonstration Base, West of Yongchang Rd., High-tech Zone, Xianyang City, Shaanxi Province, 712023 China. Website: www.creditcme.com, Email: [email protected]
See more

Catalog excerpts

CME Bump testing machine KRD20-1

Technical Specifications KRD20 Pneumatic Bump Test Machine

 Open the catalog to page 1
CME Bump testing machine KRD20-2

Web: www.creditcme.com Email: [email protected] The KRD20 series pneumatic bump test machine replaces the traditional mechanical cam cam-type crash bench and is suitable for repeated impacts on electronic components, equipment and other electrical and electronic products during transportation or working.    Fully pneumatic driven, clean and environmentally friendly, good repeatability and high reliability. Control the frequency of collisions by adjusting the gas pressure to achieve continuous high high-frequency collisions. Test time and collision frequency can be set arbitrarily, and it...

 Open the catalog to page 2
CME Bump testing machine KRD20-3

Web: www.creditcme.com Email: [email protected] Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail. No.3 Upgrade Demonstration Base, West of Yongchang Rd., High pgrade High-tech Zone, Xianyang City, Shaanxi Province, 712023 China

 Open the catalog to page 3

All CME Technology Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.