KRD11 PNEUMATIC VERTICAL SHOCK TEST SYSTEM KRD11 series pneumatic vertical shock test system is suitable for evaluating the functional reliability and structural integrity of various products under shock or bump environments, thereby improving or optimizing the structural design or layout of the products. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests. ◆ Minimum pulse width: 0.5ms Multiple waveforms: half-sine, post-peak sawtooth or trapezoid Standards Useful table size (mm) Shock waveform half sine wave Shock Amplifier Amplifier weight (

Classical Shock Waveform Pneumatic drive, simple structure and high reliability Pollution free, without hydraulic leak risk and keep the environment clean. Pneumatic drive greatly improves the shock test efficiency, maximum shock rate up to 120 times/ min. KRD11 can be equipped with half-sine wave generator, post-peak sawtooth wave generator and trapezoid wave generator. Half-sine cohesion of rubber) and a variety of different thickness of It can easily realize large pulse width and small overload test. the felt pad. Different thicknesses are connected in series With a fast shock rate comparing...

Table Layout Shock Pulse Duration (ms) Shock Pulse Duration (ms) Post-peak Sawtooth: 3~18 Trapezoid: 3~18 Bump Waveform: Half sine wave Bump Peak Acc. (g): 4~150 Bump Waveform: Half sine wave Bump Pulse Duration (ms): 2~30 Bump Peak Acc. (g): 5~100 Bump Pulse Duration (ms): 3~30 Overall Dimension (mm): 1000*1000*2100 Weight (kg): 1300 Overall Dimension (mm): 1700*1500*2300 Weight (kg): 4500 Specifications Common to All Models Bump Waveform: Half sine wave Bump Rate (times/min): 10~120 Working Environment: Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense Installation Condition: Foundation-free,...

Technical Specifications Model Rated Load (kg) Table Size (mm) Peak Acc. (g) Post-Peak Trapezoid Half-Sine Bump Waveform 6~18 Half sine wave Bump Peak Acceleration Bump Pulse Duration (ms) 1000 Bump Rate (Times/Min) Environ- Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense ment Installation source Floor Standards Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment MIL-STD-810F Note: The parameters in the table are for reference only, and the parameters agreed upon by the supplier and the buyer shall prevail....