*mydirectindustry

CMB 05 series

Product catalog summary

Specifications:
The document details specifications for hydraulic and pneumatic cylinders compliant with ISO 6020/1 05 Series. It includes dimensions, thread sizes, and mechanical properties for components like rod eyes, clevis brackets, and trunnion mounting blocks, all in millimeters. It also specifies transducer types, data formats, resolution, baud rates, input voltage, current drain, operating temperature, protection degree, and shock and vibration ratings.

Procedures:
Installation and operational procedures for inductive proximity sensors and magnetostrictive transducers are outlined, including mounting requirements and technical specifications. Storage and maintenance guidelines emphasize storing cylinders vertically and protecting them from corrosion. Installation procedures include checking for oil traces and ensuring proper seal orientation during replacement.

Standards and Norms:
The document ensures compliance with international standards such as ISO 8133, DIN 24555, and ISO 6982, along with electromagnetic compatibility requirements per EN 60 947-5-2 and CE mark conformity with CEE 89/336/CEE directive.

Recommendations:
For optimal performance, specific connectors and protective covers for sensors are recommended, along with fluoroelastomer seals for aggressive hydraulic fluids. Proper sensor installation is crucial for accurate end-of-stroke detection and cylinder performance.

Key Data from Tables and Figures:
Tables provide detailed dimensions and specifications for cylinder components, while figures illustrate space requirements for connectors and transducer configurations. Key data includes thread sizes, coupling torques, working voltages, and pressure ratings.

Critical Information:
Inductive sensors operate between -20°C to +70°C and resist vibrations. Magnetostrictive transducers offer various output signals with specific technical features. Proper sensor installation is emphasized for accurate detection and performance.

Ordering Procedures:
Instructions for ordering spare seals kits for T5 and T9 series cylinders are provided, categorized by bore size, rod diameter, and seal type, with options for different operating conditions.

Rod and Cylinder Selection:
Guidelines for selecting appropriate rod diameter and cylinder bore are included, emphasizing mechanical resistance under peak loads. Calculation procedures for determining suitable rod diameter based on mounting type and loading conditions are provided.

Cushioning and Braking:
End-of-stroke cushioning is recommended to control deceleration and reduce pressure peaks, using special cushioning cones and adjustable needle valves for braking speed control.

Technical Recommendations:
Proper sizing of the distributor is crucial for installations with regenerating circuits. Formulas for calculating rod speeds and flow rates are included, along with a table of theoretical forces developed by the cylinder at various pressures.

Additional Features:
Options for air bleeds and rotated connection positions are available upon request. Examples of order codes for specifying cylinder configurations are provided.

Overview:
The document provides detailed specifications and guidelines for rod ends used in ISO 6020/1 series cylinders, covering standard and non-standard threading options, dimensions, and mounting types.

Threading Options:
Standard and non-regulation threading options are available, including Whitworth, British Standard, and American Standard Unified. Custom rod ends can be produced based on specific drawings.

Mounting and Tightening:
Various mounting types are detailed, with guidelines for tightening rods based on diameter.

Optional Features:
Optional features include oil ports, braking systems, and inductive sensors, with information on connectors and transducers.

Accessories:
Accessories like rod eyes with spherical bearings, fork joint hinges, and clevis brackets are described, referencing relevant ISO and DIN standards.

Maintenance and Storage:
Guidelines for storage and maintenance of cylinders, including replacing bush seals and spare parts, are provided, with exploded views of mechanical parts and seals for reference.

Conclusion:
The document serves as a comprehensive guide for selecting, ordering, and maintaining rod ends and related components for hydraulic and pneumatic cylinders, ensuring compatibility with ISO standards and offering customization options.

Catalog excerpts

HYDRAULIC CYLINDERS

Open the catalog to page 1

ISO 6020/1 05 Series Presentation The range of CMB 05 series double-acting hydraulic cylinders and servo-cylinders has been developed to specifically meet the most demanding drive unit requirements of the iron and steel industry in accordance with ISO 6020/1 construction standards. The compact construction with round heads, the care taken in choosing the materials and seals used, combined with strict final testing which reproduces the cylinders normal working conditions, make these hydraulic actuators a good choose in the field of hydraulic drive units for all types of industrial applications,...

Open the catalog to page 2

ISO 6020/1 05 Series How to order a CMB 05 series cylinder compliant with ISO 6020/1 When issuing the order for the cylinder, provide the following information: The CMB 05 series cylinders compliant with ISO 6020/1 standards are provided with an identification code which describes the construction specifications in a non-ambiguous way. To make up the code for the order, follow the code diagram set out below and insert the letters identifying the various features of the desired cylinder in the sequence given below. Cylinder ordering code Features Series Bore To ISO 6020/1 standards for taking...

Open the catalog to page 3

ISO 6020/1 05 Series Mountings choice for the 05 series Side foot mounting The complete range of ISO 6020/1 05 series cylinders manufactured by CMB offers 8 different mounting types capable of meeting most working requirements. On the following pages the general criteria to be used in choosing the type and space requirements of the mounting types for single rod and double rod cylinders with their corresponding accessories are described. As regards special applications, our Technical Department is at your complete disposal for the construction of cylinders to particular requirements. Cylinders...

Open the catalog to page 4

Basic version Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 5

Side foot Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 6

Intermediate fixed trunnion XV XV+stroke minimum maximum * Specify the dimension in case of order. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 7

Rear clevis Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 8

Rear spherical bearing Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 9

Rectangular front flange Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 10

Rectangular rear flange Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 11

Front flange Unless otherwise specified, all dimensions are given in millimetres.

Open the catalog to page 12

Rear flange Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 13

ISO 6020/1 05 Series Double rod basic version Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 14

Double rod side foot 37 71 200 M160x4 220 160 * Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 15

Double rod intermediate fixed trunnion mínimum maximum * Specify the dimension in case of order. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 16

ISO 6020/1 05 Series Double rod rectangular front flange Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 17

Double rod front flange Unless otherwise specified, all dimensions are given in millimetres.

Open the catalog to page 18

Rod eye with spherical bearing (ISO 6982/DIN 24338) All dimensions are given in millimetres. Rod eye with spherical bearing (ISO 8133/DIN 24555) All dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 19

All dimensions are given in millimetres. Fork joint hinge with pin (ISO 8133) All dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 20

All dimensions are given in millimetres. Trunnion mounting block (ISO 8132) All dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Open the catalog to page 21

ISO 6020/1 05 Series Inductive proximity sensors The end-of-stroke sensors use technology of the Hall effect inductive type for reading and can be mounted both on the head and the cap as long as the mounting and other types of connection present on the same side allow for this in accordance with information given in Table 13 on page 40. The sensors can be applied to all mounting types of ISO 6020/1 cylinders and to both heads for every available bore. Inductive sensor technical specifications: · Sensor screw thread: · Coupling torque: · Reading signal space: · Working voltage: · Current capacity:...

Open the catalog to page 22

ISO 6020/1 05 Series Introduction to T5 series cylinders T5 series ISO 6020/1 hydraulic cylinders are hydraulic actuators designed to take linear position transducers and return the rod to its starting position. These hydraulic devices combined with a magnetostrictive transducer and suitable electronic conditioning enable a reliable, accurate and compact control system to be achieved which allows for great flexibility of use in all types of applications. T5 series cylinders are fitted as standard with air bleeds on the head and cap to enable air present in the rod cavity in which the transducer...

Open the catalog to page 23

ISO 6020/1 05 Series Rear dimensions of transducer with flying connector B 10 Rear dimensions of transducer integral cable C Types and dimensions of connectors Chart showing dimensions of magnetostrictive transducers: CMB hydraulic cylinders equipped with magnetostrictive transducers can be supplied with four models of connectors to be ordered separately (connection cable not supplied). Models with 6 pins are used exclusively for Analog-linear transducers and Can-Bus while those with 7 pins are used for the SSI: · Cod. 02990060000001 - 6 pins DIN metal connector with direct female coupling *...

Open the catalog to page 24

CMB 05 series

CMB 05 series

Catalog excerpts

All CMB S.r.l. Cilindri oleodinamici catalogs and technical brochures