HYDRAULIC CYLINDERS

Presentation The range of CMB 09 series double-acting hydraulic cylinders and servo-cylinders has been developed to specifically meet the most demanding drive unit requirements of the iron and steel industry in accordance with ISO 6022 and DIN 24333 construction standards. The compact construction with round heads, the care taken in choosing the materials and seals used, combined with strict final testing which reproduces the cylinders normal working conditions, make these hydraulic actuators the very best offered by technology in the field of hydraulic drive units for all types of industrial...

How to order a CMB 09 series cylinder compliant with ISO 6022 When issuing the order for the cylinder, provide the following information: The CMB 09 series cylinders compliant with ISO 6022 standards are provided with an identification code which describes the construction specifications in a non-ambiguous way. To make up the code for the order, follow the code diagram set out below and insert the letters identifying the various features of the desired cylinder in the sequence given below. Cylinder ordering code Features Series To ISO 6022 standards for taking transducer Specify bore in mm (indicate...

Mountings choice for the 09 series Side foot mounting The complete range of ISO 6022 09 series cylinders manufactured by CMB offers 7 different mounting types capable of meeting most working requirements. On the following pages the general criteria to be used in choosing the type and space requirements of the mounting types for single rod and double rod cylinders with their corresponding accessories are described. As regards special applications, our Technical Department is at your complete disposal for the construction of cylinders to particular requirements. Cylinders with side foot mounting...

Basic version ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Side foot ! Bore non-compliant with ISO 6022 standard. * Mounting holes offset from centre line. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Intermediate fixed trunnion ! Bore non-compliant with ISO 6022 standard. * Specify the dimension in case of order. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Rear clevis ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Rear spherical bearing ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Front flange FB Ø 13,5 N° 8 holes 13,5 N° 8 holes 17,5 N° 8 holes 22 N° 8 holes 22 N° 8 holes 26 N° 8 holes 26 N° 8 holes 33 N° 8 holes 33 N° 8 holes 39 N° 8 holes 45 N° 8 holes 45 N° 12 holes ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Rear flange FB Ø 13,5 N° 8 holes 13,5 N° 8 holes 17,5 N° 8 holes 22 N° 8 holes 22 N° 8 holes 26 N° 8 holes 26 N° 8 holes 33 N° 8 holes 33 N° 8 holes 39 N° 8 holes 45 N° 8 holes 45 N° 12 holes ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Double rod basic version ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Double rod side foot ! Bore non-compliant with ISO 6022 standard. * Mounting holes offset from centre line. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Double rod intermediate fixed trunnion ! Bore non-compliant with ISO 6022 standard. * Specify the dimension in case of order. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Double rod front flange FB Ø 13,5 N° 8 holes 13,5 N° 8 holes 17,5 N° 8 holes 22 N° 8 holes 22 N° 8 holes 26 N° 8 holes 26 N° 8 holes 33 N° 8 holes 33 N° 8 holes 39 N° 8 holes 45 N° 8 holes 45 N° 12 holes ! Bore non-compliant with ISO 6022 standard. Unless otherwise specified, all dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Rod eye with spherical bearing (ISO 6982/DIN 24338) ! Bore non-compliant with ISO 6022 standard. All dimensions are given in millimetres. B C1 R2 Rod eye with plain bearing (ISO 6981/DIN 24337) ! Bore non-compliant with ISO 6022 standard. All dimensions are given in millimetres. Hydraulic and pneumatic cylinders

Fork joint hinge with pin (ISO 8133) ! Bore non-compliant with ISO 6022 standard. All dimensions are given in millimetres. Weights of the 09 series Note the bore, diameter of rod, mounting type and stroke, the total weight of the cylinder is calculated by adding the weight in Kg according to mounting type at blank stroke to the weight for each 10 mm of stroke, multiplied by the stroke in cm. Bore Rod Ø Weight in kg according to the mounting type at blank stroke ! Bore non-compliant with ISO 6022 standard. Hydraulic and pneumatic cylinders

Inductive proximity sensors The end-of-stroke sensors use technology of the Hall effect inductive type for reading and can be mounted both on the head and the cap as long as the mounting and other types of connection present on the same side allow for this in accordance with information given in Table 13 on page 36. The sensors can be applied to all mounting types of ISO 6022 cylinders and to both heads for every available bore. Inductive sensor technical specifications: · Sensor screw thread: · Coupling torque: · Reading signal space: · Working voltage: · Current capacity: · Working frequency:...