- Catalogs
- C.Matic S.p.A.
- MV - Function Fittings
MV - Function Fittings
MV - Function Fittings
The document details various components and specifications for connectors used in pneumatic systems. Key materials include anodized aluminum and brass, with specific models like A313 and MV 15 highlighted for different applications. Recommended tubing materials are PA11, PA12, PA6, and Polyurethane PU (98 Shore A).
Instructions for assembly and disassembly of connectors emphasize an anti-release feature to prevent accidental disconnections. The document also covers the operation of flow control devices for pneumatic circuits, both unidirectional and bidirectional.
Operating conditions are specified with temperature ranges from -20°C to 80°C and pressure limits up to 15 bar. Recommended tubing materials include PA11, PA12, PA6, Polyethylene PE, and Polyurethane PU (98 Shore A).
Accessories such as anti-dust plug covers and tubing guides are mentioned, with specifications for different sizes and materials, including PP and PARA (Ixef® 1022/1023).
Data sheets provide detailed measurements and configurations for connectors and fittings, including flow rates and pressure ratings. Tables with dimensions and part numbers are included for easy reference.
The connectors and fittings are designed for pneumatic installations, ensuring rapid and secure connections and disconnections. The document emphasizes the use of filtered and lubricated air for optimal performance.
Flow control devices are available in versions such as .../V, .../C, .../B, with operating conditions from -20°C to 80°C and pressure ranges from 0 to 10 bar. The banjo ring remains swiveling after installation for orientation adjustments.
Components are made from nickel-plated brass (UNI EN 12164 CW614N) and include elements like needles, cartridges, seals (NBR), and gaskets (PA6).
To connect, insert the plug into the coupling. For disconnection, press the button to vent downstream air, then press again to release the plug.
Flow rates and needle turn specifications are provided for various configurations, ensuring optimal performance under specified conditions.
- Flow Control: Available with handwheel and swiveling push-in fittings. The banjo ring remains orientable after installation.
- Quick Couplings: Include male and female couplings with various thread sizes and are designed to maintain orientation post-installation.
- Safety Couplings: Feature a push-button mechanism for secure connection and disconnection, adhering to ARO 210 profile standards.
The document provides detailed specifications for various flow control devices and fittings, primarily used in pneumatic systems. The fittings are made from materials such as acetal resin and brass, with components like handwheels and push-in fittings.
The fittings are constructed from materials like Brass UNI EN 12164 CW614N, which is nickel-plated, and stainless steel AISI 302. Seals are made from NBR, and some components use PA6 and ABS plastics.
The recommended tubing materials include PA11, PA12, PA6, and Polyurethane PU (98 Shore A). These are suitable for pneumatic installations fed with filtered and lubricated air.
The fittings are designed for use in pneumatic, hydraulic, and oleodynamic circuits. They are suitable for installations operating within a temperature range of -20°C to 80°C and a pressure range of 0 to 10 bar.
The document describes flow control devices with features like swiveling outlets and check valves that prevent air flow when the tubing is not inserted. The fittings ensure that air flow is only allowed when the tubing is properly connected.
The document includes performance charts showing flow rates and needle turn adjustments for various fitting sizes and configurations. These charts help in selecting the appropriate fitting based on the required flow rate and pressure conditions.
Once installed, certain components like the banjo ring are no longer adjustable. This ensures a secure and stable connection in the pneumatic system.
The document lists various product types and their dimensions, including details like thread sizes, lengths, and weights. These variants cater to different installation requirements and system configurations.
The document outlines the specifications for various pneumatic components, primarily focusing on fittings and valves made from nickel-plated brass (UNI EN 12164 CW614N). The components are designed for use in pneumatic systems that are fed with filtered and lubricated air. Recommended tubing materials include PA11, PA12, PA6, and Polyurethane PU (98 Shore A).
The document describes a threshold sensor fitting that detects pressure drops and emits a command signal. This fitting is particularly useful when mounted directly on a cylinder, allowing for the control of piston strokes without electrical connections. The sensor requires the piston to complete its stroke for proper operation.
This fitting allows for gradual pressurization of pneumatic systems, preventing sudden impacts on actuators. The pressurization speed is controlled by adjusting a spindle, with clockwise rotation resulting in slower pressurization.
The document details flow control valves with swiveling acetal push-in fittings and handwheels. These valves allow for precise control of flow rates, with specifications provided for various sizes and configurations.
Several types of ball valves are described, including female, male, and taper male-female configurations. These valves are made from anodized aluminum and nickel-plated brass, suitable for various pneumatic applications.
Each component is accompanied by a data sheet specifying dimensions, recommended tubing, and application fields. The components are intended for use in pneumatic installations with filtered and lubricated air, operating within specified temperature and pressure ranges.
The document provides detailed specifications for various pneumatic components, including check valves, throttle fittings, and pneumatic switches. The components are designed for use in pneumatic installations fed with filtered and lubricated air. The materials used include nickel-plated brass (UNI EN 12164 CW614N) and stainless steel (AISI 302), with seals made from NBR.
The recommended tubings for these components are PA11, PA12, PA6, and Polyurethane PU (98 Shore A). The choice of tubing depends on the type of fitting connected to the valve.
The components are suitable for pneumatic systems that require controlled air flow and pressure. They are used in applications where the flow direction needs to be controlled or restricted, such as in systems with known cylinder speeds.
Check valves allow air flow in one direction only, as indicated by an arrow on the valve body. Throttle fittings contain a cartridge with a calibrated orifice to control flow rate, ensuring stability even in the presence of vibrations.
Pneumatic switches, available in 2/2 and 3/2-way versions, are used to cut off or vent the flow in a circuit. The 2/2-way switch stops the flow, while the 3/2-way switch also vents the circuit to the atmosphere.
The document includes tables and charts detailing flow rates and pressure specifications for different component types and sizes. For example, the flow rate for a 1/8" connection is 235 Nl/min at 6 bar with a pressure drop of 1 bar.
When ordering, specify the part number and the size of the calibrated orifice (D4) required for throttle fittings.
Catalog excerpts
MV LINE Raccordi a Funzione Function Fittings Raccords à fonction Funktionsverschraubungen
Open the catalog to page 1
CONTROLLED FLOW …/C = Regolazione del Flusso in Uscita Meter out flow control Réducteur de débit fonctionnant à échappement Abluftdrosselung FREE FLOW …/V = Regolazione del Flusso in Ingresso Meter in flow control Réducteur de débit fonctionnant à l’admission Zuluftdrosselung CONTROLLED FLOW CONTROLLED FLOW …/B = Regolazione del Flusso in entrambe le direzioni Bidirectional flow control Réducteur de débit bidirectionel Beidseitige Drosselung Questi dispositivi offrono la possibilità di regolare la portata d’aria in un circuito pneumatico. In base al tipo di regolatore impiegato, la regolazione...
Open the catalog to page 2
Corpo Body Corps Körper Flow control Spillo Needle Epingle Nadel Bussola Cartridge Cartouche Patrone Guarnizioni Seals Joint d’étancheité Dichtung Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Rondelle Gasket Bague Plastique Kunststoffring Connettori Multipli Multiple Connectors Multi-coupleurs Vielfachverbinder Disponibile nelle versioni: Available as: SPECIFICHE TECNICHE DATA SHEET REINSEIGNEMENTS TECHNIQUES TECHNISCHE AUSKÜNFTE Tubi di collegamento consigliati: variabili in funzione del...
Open the catalog to page 3
Regolatore di flusso con pomolo di regolazione MV 16 Corpo Body Corps Körper Spillo Needle Epingle Nadel Flow control with handwheel Pomolo Handwheel Volant moleté Rändelkopf Réducteur de débit avec volant moleté Bussola Cartridge Cartouche Patrone Guarnizioni Seals Joint d’étancheité Dichtung NBR NBR NBR NBR Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Rondelle Gasket Bague Plastique Kunststoffring PA6 PA6 PA6 PA6 Disponibile nelle versioni: Available as: SPECIFICHE TECNICHE DATA SHEET REINSEIGNEMENTS...
Open the catalog to page 4
Corpo Body Corps Körper Spillo Needle Epingle Nadel Réducteur de débit fileté Bussola Cartridge Cartouche Patrone Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Anello Banjo Ring Banjo Steckverschraubungen Rondelle Gasket Bague Plastique Kunststoffring Guarnizioni Seals Joint d’étancheité Dichtung Regolatore con attacco filettato RA line standard GU26-21 fittings Raccords série RA RA Verschraubung Portata [Nl/min] / Flow Rate [Nl/min] n° giri spillo di regolazione / n° of needle turns Disponibile...
Open the catalog to page 5
Regolatore con attacco filettato e pomolo di regolazione MV 40 Corpo Body Corps Körper Spillo Needle Epingle Nadel Male flow control with handwheel 3 Pomolo Handwheel Volant moleté Rändelkopf Bussola Cartridge Cartouche Patrone Réducteur de débit fileté avec volant moleté Drosselrückschlagventil mit Gewinde und Rändelkopf 6 Guarnizioni Seals Joint d’étancheité Dichtung Rondelle Gasket Bague Plastique Kunststoffring Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Anello Banjo Ring Banjo Steckverschraubungen...
Open the catalog to page 6
Corpo Body Corps Körper Brass flow control with swivelling push-in fitting 2 Spillo Needle Epingle Nadel Réducteur de débit avec raccord automatique tournant en laiton 3 Bussola Cartridge Cartouche Patrone Guarnizioni Seals Joint d’étancheité Dichtung Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Anello Banjo Ring Banjo Steckverschraubungen Raccordo Automatico serie MA MA line push-in fittings Raccords instantanés série MA MA Steckverschraubungen Innesti Rapidi di Sicurezza in Acciaio Inox 316L...
Open the catalog to page 7
MV 41 Corpo Body Corps Körper Brass flow control with swivelling push-in fitting and handwheel Spillo Needle Epingle Nadel Pomolo Handwheel Volant moleté Rändelkopf Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Réducteur de débit avec raccord automatique tournant en laiton et volant moleté Bussola Cartridge Cartouche Patrone Messing Drosselrückschlagventil mit schwenkbarer Steckverschraubung und Rändelkopf Guarnizioni Seals Joint d’étancheité Dichtung Anello Banjo Ring Banjo Steckverschraubungen...
Open the catalog to page 8
Flow control with swivelling push-on fitting Corpo Body Corps Körper Spillo Needle Epingle Nadel Réducteur de débit avec raccord à écrou tournant Bussola Cartridge Cartouche Patrone Drosselrückschlagventil mit schwenkbarer Überwurfmutterverschraubung Guarnizioni Seals Joint d’étancheité Dichtung Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Raccordo a Calzamento serie MC MC line push-on fittings Raccords à coiffe série MC MC Verschraubung Anello Banjo Ring Banjo Steckverschraubungen Regolatore...
Open the catalog to page 9
Regolatore con raccordo orientabile a calzamento in ottone e pomolo di regolazione MV 42 Corpo Body Corps Körper Spillo Needle Epingle Nadel Brass flow control with swivelling push-on fitting and handwheel Pomolo Handwheel Volant moleté Rändelkopf Réducteur de débit avec raccord à écrou tournant en laiton et volant moleté 4 Bussola Cartridge Cartouche Patrone Anello Banjo Ring Banjo Steckverschraubungen Raccordo a Calzamento serie MC MC line push-on fittings Raccords à coiffe série MC MC Verschraubung ø8 1/8 Portata [Nl/min] / Flow Rate [Nl/min] n° giri spillo di regolazione / n° of needle turns...
Open the catalog to page 10All C.Matic S.p.A. catalogs and technical brochures
XT and Push to Lock9 Pages
EV 104 Pages
PT - D.O.T. Push-in fittings9 Pages
There is something in the air126 Pages
PA LINE5 Pages
MO LINE7 Pages
AR LINE4 Pages
Tools5 Pages
Tubings5 Pages
CO Line - Multiple Connectors14 Pages
GU - Couplings11 Pages
AP - Mix Push in Fittings8 Pages
PN - Push in Fittings, NPT11 Pages
PU - NPT Couplings3 Pages
GU Safety - Safety Couplings13 Pages
MA - Push in Fittings14 Pages
