- Catalogs
- C.Matic S.p.A.
- MO - Brass Nickel Plated Compression Fittings
MO - Brass Nickel Plated Compression Fittings
MO - Brass Nickel Plated Compression Fittings
- Materials: 316L Stainless Steel and Brass EN 12164 CW510L, compliant with NSF/ANSI 372.
- Temperature Range: -40°C to 150°C for MO line; -20°C to 80°C for RF line.
- Pressure: Maximum 60 bar for MO line.
- Standards: ISO8434/DIN 2353 for MO line; NSF 169 and NSF/ANSI 372 for RF line.
- OX Line: 316L Stainless Steel fittings for various applications.
- MO Line: Nickel-plated brass fittings for pneumatic/hydraulic applications, suitable for copper, aluminum, PA11, and PA6 tubings.
- RF Line: Standard fittings for food and beverage applications, made from low-lead brass, certified for contact with water, tea, and coffee.
- Recommended Tubings: Copper and aluminum; PA11 and PA6 with reinforcement.
- Tolerances: +/- 0.07 mm up to Ø 10 mm, +/- 0.1 mm up to Ø 15 mm.
- Cut the tube square, ensuring no burrs.
- Insert the nut and olive onto the tube, with the olive edge towards the tube end.
- Finger tighten the nut until resistance is felt.
- Use a spanner to tighten the nut 1.5 to 2 turns.
- Check the olive's grip on the tube, then tighten the nut an additional 1/4 turn.
- Ensure no tensile strength is applied to the tubing and adhere to the recommended bending radius.
Catalog excerpts
MO LINE Raccordi a Ogiva in Ottone Nichelato Brass Nickel-Plated Compression Fittings Raccords à bague en laiton nickelé Schneidringverschraubungen aus Messing vernickelt I I Raccordi ad Ogiva della serie MO garantiscono l’aggraffaggio del tubo e la tenuta pneumatica/idraulica del raccordo tramite la compressione sul tubo di un anello denominato “ogiva”. Le sedi delle ogive, le ogive ed i dadi sono dimensionati seguendo le prescrizioni della normativa ISO8434/DIN 2353. Tutti i raccordi della serie MO vengono sottoposti ad un trattamento superficiale di Nichelatura elettrolitica. GB The compression fittings of the MO line ensure the pneumatic/hydraulic tightness of the tubing by compression of an olive ring on the tubing. The olive seats, the olives and the nuts are all manufactured according to ISO8434/DIN 2353 norm. All MO fittings are electrolytic nickel plated. F Les raccords à bague de la série MO garantissent le tenue pneumatique et hydraulique sur le tube par la compression de la bague sur le tube même. Le siège de la bague, la bague et l’écrou sont produits selon la norme ISO 8434/DIN2353 Tous les raccords de la série MO sont soumis à nickelage électrolytique. D Die Schneidringverschraubungen der MO Baureihe garantieren die Schlauchhaltung und die hydraulische und pneumatische Dichtheit durch die Schneidringkomprimierung am Schlauch. Das Schneidringgehäuse, der Schneidring und die Überwurfmutter sind gemäß ISO8434/DIN 2353 hergestellt. Alle MO Verschraubungen sind aus Messing, elektro
Open the catalog to page 1
Corpo Body Corps Körper Dado Nut Écrou Überwurfmutter Ogiva Olive Bague Schneidring Ottone UNI EN 12164 CW614N - UNI EN 12165 CW617N Nichelato Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated Laiton UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickelé Messing UNI EN 12164 CW614N - UNI EN 12165 CW617N vernickelt Ottone UNI EN 12164 CW614N Nichelato Brass UNI EN 12164 CW614N Nickel Plated Laiton UNI EN 12164 CW614N Nickelé Messing UNI EN 12164 CW614N vernickelt Ottone UNI EN 12164 CW614N Brass UNI EN 12164 CW614N Laiton UNI EN 12164 CW614N Messing UNI EN 12164 CW614N SPECIFICHE TECNICHE...
Open the catalog to page 2
MO Profondità di inserimento del tubo L Tubing insertion depth Profondeur d’insertion du tube Øe Tube Raccordi Standard per Applicazioni Food and Beverage Standard Fittings for Food and Beverage Applications ASSEMBLY INSTRUCTIONS INSTRUCTIONS DE MONTAGE MONTAGEANWEISUNGEN Raccords Standard le tube à 90° domaine alimentaire 90° des boissons 1. Cut the tube square and make sure that no 1. Couper pour le tout en vérifiant que 1. Schlauch bei et abschneiden und feststelburr (internally and externally) is left; aucune bavure intérieure ou extérieure se len, dass es danach keinen Innen-oder-AusStandardverschraubungen...
Open the catalog to page 3
MO 11 Taper straight, male Diritto maschio conico ØTubo Gerade Einschraubverschraubung, kegelig Union simple mâle conique MO 12 Parallel straight, male Diritto maschio cilindrico ØTubo Gerade Einschraubverschraubung, zylindrisch Union simple male cylindrique Diritto femmina ØTubo Gerade Aufschraubverschraubung Union simple femelle Giunzione intermedia ØTubo Union simple égale Gerade Verbindung
Open the catalog to page 4
MO 15 Giunzione intermedia passaparete Bulkhead union Union traversée de cloison Gerade Schottverschraubung MO 16 Taper elbow fitting, male Gomito maschio conico L3 Winkelverschraubung, kegelig Raccord à coude mâle conique Type ØTubo Type ØTubo
Open the catalog to page 5
Dado ØTubo Ogiva ØTubo
Open the catalog to page 6
Inner reinforcement piece for tubings D1 Pièce renforçage intérieur pour tubes Innere Verstärkungsstück für Schläuche Single banjo ring L2 Banjo simple
Open the catalog to page 7All C.Matic S.p.A. catalogs and technical brochures
XT and Push to Lock9 Pages
EV 104 Pages
PT - D.O.T. Push-in fittings9 Pages
There is something in the air126 Pages
PA LINE5 Pages
MO LINE7 Pages
AR LINE4 Pages
Tools5 Pages
Tubings5 Pages
CO Line - Multiple Connectors14 Pages
GU - Couplings11 Pages
AP - Mix Push in Fittings8 Pages
PN - Push in Fittings, NPT11 Pages
PU - NPT Couplings3 Pages
GU Safety - Safety Couplings13 Pages
MA - Push in Fittings14 Pages
MV - Function Fittings42 Pages
