*mydirectindustry

AR LINE

Product catalog summary

Overview
Rotary push-in fittings are designed for applications involving rotating and swinging movements. They are suitable for use in pneumatic circuits and are ideal for preventing side loads that could affect the bearings and reduce the product's lifespan.

Technical Specifications

Recommended Tubing: Polyurethane (PU) is recommended, while rigid tubing is not advised.
Application Fields: Primarily used in pneumatic circuits.
Operating Conditions: The fittings can operate at temperatures ranging from -20°C to 80°C and a maximum pressure of 20 bar.
Material Composition: The fittings are made from materials such as 100Cr6 steel for ball bearings, nickel-plated brass, acetal resin (POM), and stainless steel AISI 301 and 302.

Installation Instructions

Cut the tube at a 90° angle using a hose cutter to avoid burrs and ensure the tube is not ovalized.
Insert the tube into the fitting until it reaches the bottom.
To release the tube, press the release ring and simultaneously pull the tube out.

Precautions

Avoid applying tensile strength to the tubing once connected.
Ensure the minimum recommended bending radius is maintained.
Prevent any contact with the release ring to avoid accidental tube disconnection.
Follow the recommended tightening torque for threaded parts as specified in the torque chart.

Performance Parameters

Maximum rotational speed varies with tube diameter, ranging from 250 rpm for Ø12 tubes to 500 rpm for Ø4 tubes.
Insertion depths for tubes range from 13.2 mm to 19.5 mm depending on the tube diameter.

Catalog excerpts

AR LINE Raccordi Automatici Rotanti Rotary Push-in Fittings Raccords Instantanés Rotatif Drehverschraubungen I Raccordi Automatici Rotanti ideali per applicazioni con movimenti rotanti ed oscillanti. GB Rotary push-in fittings suitable for applications with rotating and swinging movements. F Raccords rotatives idéales pour des applications avec mouvements de rotation et oscillation. D Drehverschraubungen tauglich bei Anwendungen mit Dreh und Schwenkbewegungen.

Open the catalog to page 1

Anello di Ritegno Holding Ring Bague de retenue Haltering Pinza aggraffaggio Gripping ring Pince Spannzange Anello portapinza Protection Ring Bague protection Schutzring Guarnizioni Seals Joint d’étancheité Dichtung Cuscinetto a sfere Ball bearing Roulement à billes Kugellager Seeger Seeger Seeger Seeger Ottone UNI EN 12164 CW614N - UNI EN 12165 CW617N Nichelato Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated EFREE ON Laiton UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickelé Messing UNI EN 12164 CW614N - UNI EN 12165 CW617N vernickelt Resina Acetalica (POM) Acetal Resin (POM) Résine...

Open the catalog to page 2

AR Profondità di inserimento del tubo L Tubing insertion depth Profondeur d’insertion du tube ASSEMBLY INSTRUCTIONS 1. Tagliare il tubo a 90° (servendosi della pinza tagliatubo TCUT) verificando l’assenza di bave interne ed esterne e facendo attenzione che il tubo non si presenti ovalizzato dopo il taglio. 2. Inserire il tubo nel raccordo spingendolo fino in battuta. 1. the tube square (by means of a hose cutCut ter i.e. our TCUT) making sure that no burrs are left and that the tube is not oval. 2. Insert the tube into the fitting until it bottoms. 1. Sectionner le tube à 90° par notre coupe...

Open the catalog to page 3

AR 11 Diritto maschio Conico rotante Straight male fitting, rotating Raccord droit mâle, rotatif Einschraubverschraubung, rotatorisch AR 15 Gomito maschio conico rotante Elbow male fitting, rotating L3 Type ØTubo Raccord à coude, rotatif

Open the catalog to page 4

All C.Matic S.p.A. catalogs and technical brochures

Archived catalogs

MT - Push in fittings for Vehicles Applications
2 Pages