1. Catalogs
  2. CM Srl
  3. MIX series

MIX series

MIX series

MIX series

Product catalog summary
Overview: The MIX Mixing Bucket is designed for efficient concrete mixing in various conditions, with capacities ranging from 160 to 1300 liters. It is suitable for use in construction, demolition, recycling, and more.
Specifications:
  • Useful width ranges from 800 mm to 2200 mm.
  • Rated capacity varies from 160 liters to 1300 liters.
  • Maximum capacity ranges from 180 liters to 1600 liters.
  • Void weight spans from 200 kg to 1130 kg, while weight at full load ranges from 580 kg to 4250 kg.
  • Transmission is chain-based with hydraulic mouth opening.
  • Oil flow requirements range from 20/30 l/min to 150/200 l/min, with pressure between 150 to 200 bar.
  • Dimensions vary across models, with the largest being 2400 x 1400 x 1400 mm.
Strengths:
  • Equipped with a 12/24 Volt electric valve for hydraulic mouth opening.
  • Components made from durable HARDOX 450 material.
  • Engine withstands up to 350 bar pressure.
  • Features include double internal motor shaft support, chain tensioning rod, and standard hose for concrete discharge.
  • Maintenance is straightforward and uncomplicated.
Optional Features:
  • Hydraulic grid opening and connector options.
  • Pre-arrangement for various machinery including excavators and tractors.
  • Interchangeable bolted upper bracket.
Applications: Suitable for use in canalization, subsoil work, demolitions, construction, tunnels, agricultural maintenance, recycling, quarries, mines, and street work.
Note: Weights and dimensions may vary without notice, and weight does not include the coupler.
See more

Catalog excerpts

MIX series-2

MIXING BUCKET It can mix concrete in any condition and in a short time. Produced from 160 up to 1300 lt. OPTIONAL - Hydraulic grid opening - Pre-arrangement for excavator / backhoe / wheel loader / telescopic handler / tractor - Interchangeable bolted upper bracket - 12/24 Volt electric valve for hydraulic mouth opening - Cutting edge, shoulders, bottom and propeller in HARDOX 450 - Engine resistant up to 350 bar - Double internal support of motor shaft - Chain tensioning rod - Chain transmission - Supporting foot during the mixing operation - Hydraulic mouth for discharge - Standard hose for...

 Open the catalog to page 2

All CM Srl catalogs and technical brochures

  1. CBF EN

    2  Pages

  2. CDS Series

    2  Pages

  3. CBS PROFI

    2  Pages

  4. CSK

    2  Pages

  5. PV series

    2  Pages

  6. G SERIES

    2  Pages

  7. FS series

    2  Pages

  8. CBF-L Series

    2  Pages

  9. CBS HD

    2  Pages

  10. T SERIES

    2  Pages

  11. TM SERIES

    2  Pages

  12. Multiskid RC

    9  Pages

  13. CBR series

    2  Pages

  14. FSE SERIES

    2  Pages

  15. CBS series

    2  Pages

  16. CSA Series

    2  Pages

  17. CBS MK series

    2  Pages

  18. CSI series

    2  Pages

  19. CR series

    2  Pages

  20. BP series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.