Power Hoist Brochure
6Pages

{{requestButtons}}

Catalog excerpts

Power Hoist Brochure - 1

The Following are trademarks of Columbus McKinnon Corporation registered in the U.S. Patent and Trademark Office: CM, AirStar,Apollo, Cady, Hoistaloy, Lodestar, Load Limiter, Polaris, Powerstar, RailStar, ShopStar, Valustar. The following are trademarks of Columbus McKinnon Corporation: ShopAir, LodeRail. > 2003 Columbus McKinnon Corporation20M SS 10/03 PHT-1 Printed in USA size="-1">

Open the catalog to page 1
Power Hoist Brochure - 2

. Capacities from 1/8 to 3 tons ՕPrecision machined and hardenedliftwheel with tempered chain guides for precise chain liftwheel fitEasy access to working parts for fast troubleshooting and repairՕUses efficient regenerative brakingthat avoids heat generation or powerreduction in power trainMeets ASME /ANSI B30.16ՕGear train lifetime lubricated withnon-oxidizing greaseGearing designed for exceptionallylong life and quiet operationՕH4 Duty Standard Rugged Control StandardՕThoroughly inspected and tested to 125% of rated capacity prior to shipment Hoist duty motor, standard protector overload...

Open the catalog to page 2
Power Hoist Brochure - 3

Capacities from 250 to 1,000 pounds Օ Capacities from 250 to 1000 pounds Standard Protector overload deviceՕIndustrial duty air motor for tough applicationsThreaded external exhaust for piping away exhaust in cleanroom or painting applications.ՕVariable flow, two lever pendantfor precise load spotting Hardened forged steel, latch-type lower hook rotates 360 degrees Օ Gear train is lifetime lubricated with non-oxidizing grease Rugged, cast aluminum alloy hoist frameՕ Lifetime warranty Made in U.S.A. > ( 113 to 454 kg.) ՕSingle reeved units weigh less than 30 pounds > ( 113 to 454 kg.) (13.6...

Open the catalog to page 3
Power Hoist Brochure - 4

Capacities from 1/4 to 1 ton ՕPrecision cut, heat treatedhelical and spur gear combination for quiet e fficient operationPendant throttle handle isfull flow design for preci-sion throttle capabilitiesՕHook or lug suspensiona v a i l a b l eInternal muffler reduces sound levelՕMetric ratedSpark-resistant models availableՕStandard 10-ft. lift > (250 to 1,000 kg.) (6.2 bar) (500 to 3,000 kg.) Equa-torque gearing provides a close meshed, compact gearreduction ՕLimit lever prevents over-travel in both directionsAluminum frame, cover, and control headՕExternal speed adjustment screwsPull cord...

Open the catalog to page 4
Power Hoist Brochure - 5

Capacities from 3 to 15 tons ՕCapacities from 2 to 15 tons > (3,000 to 15,000 kg.) (2,000 to 15000 kg.) Weston - type mechanical load brake and multiple disc motor brakeՕBlock operated limit switch limits hook travelHigh torque, heavy - duty hoist motor for smooth load handling ՕWide faced helical heat treated steel gearing assures long life and quiet operationHinged control panel cover permits easy access to the control componentsՕLifetime warrantyMade in U.S.A. ՕCapacities from 1/4 to 2 tons > (125 to 2,000 kg.) Rated H-4, heavy-dutyՕLiftwheel has machined chain pockets and is...

Open the catalog to page 5
Power Hoist Brochure - 6

Capacities from 1/4 to 3 tons > (250 to 3,000 kg.) ՕNegotiates radius curvesas tight as 7 to 10 inches Capacities from 1/2 to 25 tons > (500 to 25,000 kg.) (.18 to .25 m) ֕Heavy duty steel side frames extend beyond the wheels to provide these trolleys with maximum strength, rigidity, and added protection for the trackwheelsTrolley wheels are fully machined from alloy cast iron and hardened for high strength and long lifeՕAvailable in both plain and geared versionsSpark resistant units availableՕOne-year warrantyMade in U.S.A. ՕExclusive Dial-Fitcollar quickly adaptstrolley to wide range of...

Open the catalog to page 6

All CM Industrial Products catalogs and technical brochures

  1. LODESTAR

    24 Pages

  2. SHACKLES

    16 Pages

  3. Camlok Clamps

    28 Pages

  4. Man guard

    6 Pages

  5. Hurricaine

    4 Pages

  6. Lodestar

    6 Pages

Archived catalogs

  1. PROSTAR

    2 Pages

  2. AIR BALANCER

    1 Pages