Miniature Pneumatic Products for Scientific Applications
48Pages

MedicalՕ Pharmaceutical Analytical Օ Dental Electronic ValvesCheck ValvesՕControl ValvesProportional ValvesՕRegulators Fittings & TubingՕand more >

Clippard EV and ET valves are trusted for use inOphthalmic Surgery procedures.The valves are commonly used for controlling vacuum during cornea replacement surgery.The eye is an extremely delicate organ requiring acute care throughout the surgical procedure,so reliability and ease of use are crucial elements in this application.

ETO and similar styles have top M5 threaded fitting forN.C.exhaust or N.O.inlet.The Oxygen Clean port is integral to the core,while the Scientific port is sealed with anaerobic thread sealant > Adjusting ring may be loosened for positioning to orientconnections. DO NOT REMOVE.Parts orientation will be lost and warranty voided. > Valve caps are of molded Hytrel. Yellow Cap - Scientific Series White Cap - Oxygen Clean Series > One internal moving part that travels a mere 0.18 mm > Orifice sizes of 0.64,1.0 and 1.5 mm (others available) > Manifold mount base shown permits fast,secure mounting...

All EV,ET and EC series electronic valveswith the ғO-option are available manufactured and assembled for use in Oxygen-enriched environments forapplications that are extremely sensitiveto contamination. Valves are ultrasonically cleaned,assembled,inspected and tested in an enclosed controlled area with a state- of-the-art positive pressure High Efficiency Particulate Air (HEPA) filtration system Both organic and inorganic contaminants such as particulate matter and Hydrocarbon oils are removed No organic sealants,adhesives or lubricants are used in the manufacturing process Feature FKM...

GasChromatography/ Mass Spectrometry > Special EV/ET valves are used toselect gases,provide mass flow and to isolate gas samples in gas chromatography applications. These valves use special seal materials and undergo extensive cleaning in order to help customers attain accuracies to parts per trillion.Mass spectrometers also use Clippard electronic valves in similar applications where leakage concerns are critical. Pollution Control > Clippard electronic valves are used in air quality monitoring instrumentation.These valves are used to help control flow,isolate samples and to zero...

Respiratory > Respirators release an intermittent flow of breathing gas into the lungs of a patient, followed by an expiration phase,in which the supply of breathing gas is stopped and the patient is exhaling on their own.It is crucial to monitor the amount of breathing gas in the patients lungs so as to inhibit a premature inspiration phase. The EV series valves can provide that control to ensure accurate and consistent repeatability. Ventilation > For patients who need mechanical assistance in order to breatheefficiently,ventilators regulate exact adaptation of pressure and flow...

43.8 4.0 M5 thd.exhaust (3-way only) 5.5 #10-32 thd.(compatible withM5 thread)manifold inlet S-ECN,S-ETN & S-EVN series valves are 2- and 3-way Normally Open solenoid valves.The Normally Open inlet is through the center mounting stud,so the valves can be supplied directly from the manifold without external tubing. > 30.22.2 dia. Medium: Non-Corrosive Gases Material: Electroless Nickel Plated Brass,Stainless Steel,ENPSteel Temperature Range: -1 to 82˚C Power Consumption: 0.67 watt Response: 5 to 10 milliseconds Mounting: Manifold with #10-32 Stud (fits M5 thread) Operating Range: 90 to 150%...

Leak Detection > The EV and ET valves are used for the protection ofthe differential pressure-sensors in leak test equip- ment.They are also used to pressurize and vent test chambers and cavities being tested for leaks.In portable gas mask leak tester devices,the EV valves pressurize the mask and hold that pressure for a given amount of time to ensure the mask is air tight.These devices are used by military troops out in the field so positive sealing and high reliability are key elements of these applications. Differential Pressure Testing > This leak tester is a fully automatic...

☎ Normally Closed,Pressure Piloted Valve Piloted by standard EV valve 1.4 to 7 bar Inlet Pressure 173 lpm @ 7 bar Air Flow Response time of 20 milliseconds at 1.4 bar;13 milliseconds at 7 bar Inlet and outlet ports through manifold Nickel plated brass,acetyl,stainless steel and Buna-N Part No.Description EVB-2Valve Booster,2-Way Use only 3-way pilot valves in conjunction with 2-way and 3-way booster EVB-3Valve Booster,3-Way > Normally Closed,Pressure Piloted Valve 2 to 7 bar Inlet Pressure Pilot Pressure:(2020-MG) 60% of supply pressure,minimum 620 lpm @ 6 bar air flow Approximately 20 ms...

Part No.Description Part No.Description Part No.Description ET-C481.2 m Connector C2-RB18457 mm Lead 3831Connectors ET-C1203 m Connector C2-RB1203 m Lead > 15.9AӔM5 x 3/16" deep mounting holesBӔG1/8manifoldinlet port(both ends)11.322.24.023.8LӔM5 valve inlet portsvalve outlet portsM5 manifold outlet ports 15482-8-M5822.9 mm48.3 mm96.5 mm 15482-10-M51022.9 mm71.1 mm116.8 mm 15482-12-M51222.9 mm96.5 mm143mm > Not intended for use with Oxygen Clean Series valves.Additional Configurations andSpecial Manifolds Available.Call for further information.

Non-invasive blood pressure monitoring involves the external measurement of pressure and pulses.Clippards proportionalvalve can provide the precise control needed for accurate measuring of the patientsҒblood pressure. > Clippard EV,ET and ES valves as well as Air Volume Tanks (AVTs) are used in Cytometry devices.The valves are used to control pinch valves regulating the flow of reagents as well as to control actuators for positioning of samples and other materials.AVTs are used for dampening supply pressure surges to ensure smooth operation throughout the test. >

In order to blend the proper amount of gases to obtain a desired levelof anesthesia,these machines utilize the capabilities of Clippard check valves,control valves,and the electronic valve series.These valves allow the doctor to deliver an accurate and continuous supply of medical gases mixed with an accurate concentration of an aesthetic vapor to the patient at a safe pressure and flow.