CP1
2Pages

CORDIS CP1 DYNAMIC ELECTRONIC PRESSURE CONTROLS Known for reliability, innovation and focus on miniature pneumatics, Clippard’s Cordis Pressure controllers utilize the proven EVP and DVP proportional valve series allowing for steady, accurate and repeatable downstream pressure control as demand or process changes. The result, a very precise linear pressure control within a closed-loop system providing ultra-high resolution and repeatability. The Cordis uses a microcontroller, an internal pressure sensor, and a Clippard proportional valve. The inlet valve is connected to the moderately regulated supply pressure. Once a command is Precise, linear pressure control within a closed-loop system with ultra high resolution and repeatability Medium Clean, dry, non-corrosive gases Material, Wetted Sensor: Polyamide, Manifold: Anodized Aluminum, Valves: please refer to the M-DVP or M-EVP specifications Valve Function Normally-Closed Proportional Calibrated Range Typical Response Time Operating Temperature proportional valve closes and allows process to consume the remaining downstream pressure. Consult Clippard for application assistance and product specifications. More Details point the sensor detects a value higher than the set point, the for the microcontroller to satisfy the set point in the process. If at any Mounting Attitude to pass over the sensor element which provides an active feedback Typical Flow increased, the proportional valve opens up to allow supply pressure • Smooth linear control • Integrated internal feedback • Multiple flow configurations • Dynamic proportional pressure control • Non-pulsing proportional fill • Customizable pressure ranges and mounting options • Multiple inert gas compatible • Customizable Calibrated Ranges Equipment used for test and calibration is NIST Traceable Clippard’s proven DVP or EVP proportional valves provide fast, stable control of pressure +32 10 45 21 34 | clippard.eu CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001 • TDS 1.23 For warranty and disclaimer information,

ORDERING INFORMATION Imperial Metric Consult Clippard for availability of non-standard commands and other options. In-Line Manifold Accessory CPSH-C1 M8 Female Mating Connector Accessory Cable, 36” Calibrated Pressure Range 0 to 1 psig 0 to 5 psig 0 to 15 psig 0 to 30 psig 0 to 100 psig 0 to 150 psig 0 to 0,5 bar 0 to 1 bar 0 to 2 bar 0 to 7 bar 0 to 10 bar CORDIS CP1CP1 SINGLE VALVE PRESSURE CONTROLS CORDIS SINGLE VALVE PRESSURE CONTROLS In-Line MountMount In-Line Manifold Mount Mount Manifold +32 10 45 21 34 | clippard.eu CLIPPARD INSTRUMENT LABORATORY, INC. • ISO 9001 • TDS 1.23 For...