Compact, rugged lathe for on-site re-turning of small shafts or journals A compact, rugged portable lathe for onsite re-turning of small shafts or journals, the PL2000 Portable Lathe mounts on the end of the shaft. compact machine is able to work within a 14 inch (355.6 mm) diameter swing clearance at the end of the shaft. Compact, powerful, precise. • Automatic axial feed is infinitely variable from 0 - 0.35 inches/rev. (0 - 8.89 • The 0.6 Hp (0.45 kW) electric motor mm/rev.) and 5.5:1 gear reduction provides plenty of torque. A 1.22 Hp (0.91 kW) • Adjustable tool head and round tool pneumatic motor is also available. bits allow quick tool positioning for accurate turning. • Tool reach up to 12.5 inches (317.5 mm) from end of shaft. Quick and easy setup • Criterion style tool head provides • Mounts on the end of the shaft. Simply accurate depth adjustments in 0.001 remove the gear or bearing to expose inch (0.0254 mm) increments. the end of the shaft. • Turns shafts from 1.5 - 9.0 inches • The PL2000 can be set up by an expe(38.1 - 228.6 mm) in diameter. This rienced operator in less than an hour. Drill and tap four mounting holes on the end of the shaft to attach the mounting flange. (Shafts less than 3.75 inches (95.3 mm) in diameter only need one hole drilled and tapped for the single bolt mounting adapter.) The body of the machine is attached, centered, and aligned in a

SPECIFICATIONS Machine Performance Ranges Turning Reach Shaft dia. maximum without optional spacer/counterweight assembly with the optional spacer/counterweight assembly Shaft dia. minimum without optional spacer/counterweight assembly Shaft dia. minimum with the optional spacer/counterweight assembly Feed rate, automatic (infinitely variable) Cutter modified 1/2 inch (12.7 mm) HSS round lathe tool bit Power Options Power, electric 120V, 50/60 Hz or 230V, 50/60Hz 0.66 Hp 0.49 kW Torque: 40 ft-lbs (53.7 N•m) at 78 rpm bar speed. Bar speed: 52 - 104 rpm max. Motor Speed: 110V: 0-109 rpm, 230V:...

OPERATIONAL DIMENSIONS Dimensions in Inch (mm) PL2000 with Electric Motor PL2000 with Pneumatic Motor page 3 CLIMAX Portable Machining & Welding Systems Web site: climaxportable.com Worldwide Phone: +1 503 538 2185 N. America Toll-Free: 1 800 333 8311 Fax: +1 503 538 7600 E-mail: [email protected]

TOOL CONFIGURATIONS Select your PL2000 in 5 easy steps. 1 2 3 4 5 Select a Machine Configuration Select a Bolt Adapter Select a Dial Indicator Assembly Select a Spacer Assembly Select a Tooling Pack To configure the lathe you require, select the option you need in each step, then contact your CLIMAX representative. 1 Machine Configuration PL2000 Portable Lathe, Electric 120 V, 60 Hz 31591 Standard PL2000 complete with 0.6 Hp (0.45 kW) electric motor, instruction manual, and tool kit. Shipped in wooden crate. Net weight 99 lb (44.9 kg). PL2000 Portable Lathe, Electric 230 V, 50 Hz As above, with...

OEM PROFESSIONAL OPERATIONAL TRAINING Backed by Over 50 Years of Experience CLIMAX pioneered the concept of portable machine tools in 1964. Since that time, CLIMAX has grown to become the world’s largest provider of innovative on-site machining solutions. Professional, Experienced Instructors All training programs are taught by experienced OEM CLIMAX trainers. Your instructor will provide valuable information on operator safety, tool set-up, mounting, and operation that will help you complete your on-site machining tasks quickly and to the highest quality standards. Operator safety Tool component...

CLIMAX GLOBAL LOCATIONS Cleveland REGIONAL OFFICE | H&S TOOL FACTORY Manchester UK HEADQUARTERS Düren EUROPEAN HEADQUARTERS Portland WORLD HEADQUARTERS | FACTORY Houston REGIONAL OFFICE Field Sales Locations Field Sales & Rental Locations South Africa REGIONAL OFFICE Baton Rouge REGIONAL OFFICE Singapore ASIA PACIFIC HEADQUARTERS Dubai MIDDLE EAST HEADQUARTERS Saudi Arabia REGIONAL OFFICE Call CLIMAX for: RENTALS SPARES, REPAIR & MAINTENANCE On selected models. With 20+ worldwide rental depot locations, you are never far away from CLIMAX. Call us for anything you need to keep your system running...