Flange Facing

Product catalog summary

Overview
H&S Tool provides four models of portable pipe machine tools designed for flange facing, powered by pneumatic or electric motors. These tools are suitable for field use and can be operated by a single worker. Conversion kits are available for different models, including Model B, MS, MT, and MFT, with illustrated instructions for easy setup.

Specifications
The tools offer a working range from 0.750" to 16.250" O.D. and can achieve surface finishes between 63 to 500 RMS. The tool feed rate is 0.005" per pin, with axial feed rates per full turn varying by model. Adjustments can be made in increments of 1/4, 1/2, and 3/4 turns, affecting the depth of cut.

Models and Features

Model BF: Working range of 0.750" I.D. to 4.120" O.D., with a maximum tool travel of 1.500".
Model MSF: Working range of 1.250" I.D. to 6.190" O.D., with a maximum tool travel of 2.000".
Model MTF: Working range of 3.250" I.D. to 10.630" O.D., with a maximum tool travel of 3.000".
Model MFTF: Working range of 4.250" I.D. to 16.250" O.D., with a maximum tool travel of 3.000".

Key Features

Single-person setup and operation.
Quick field conversion between beveling machine and flange facer.
Internal locking for increased safety and accuracy.
Adjustable to a wide range of face surfaces.

Technical Details
Each model has specific requirements for minimum mounting depth and tooling. The power units vary in weight and motor specifications, with pneumatic motors ranging from 0.9 HP to 3.0 HP. Air volume and pressure requirements are consistent across models, with adjustable speeds.

Additional Information
Specifications are subject to change without notice. The document also includes detailed tables for size pins and I.D. ranges for various models and mandrels.

Catalog excerpts

Flange Facing .750" to 16.250" (19.1 to 412.8 mm) O.D. Simple, Safe, Accurate Flange Facing H&S Tool offers four models of reliable pipe machine tools with premium flange facing conversion accessories. Each is powered by reliable pneumatic or electric motors to accurately meet your job site or shop requirements. The tools are portable, making them ideal for use in the field. Setup and operation is easily handled by a single worker. Kits include everything necessary to convert your Model B, MS, MT or MFT beveling tool with illustrated instructions. Standard wedge plates can be used for internal locking or precision elbow mandrels are available. The mandrels are designed to mount in short-radius elbows. The minimum straight depth to mount the model MSF is .500" [12.7 mm], model MTF is 1.000" [25.4 mm] and model MFTF is 1.250" [31.8 mm]). Centering and squaring devices make accurate machining of gasket surfaces and/or bolt patterns simple and safe. • Single Person Setup And Operation • Field Conversion Between Beveling Machine And Flange Facer Is Quick And Easy • Adjust Between A Wide Range Of Face Surfaces • Internal Locking Increases Safety and Acc

Open the catalog to page 1

Flange Facing Tools and Accessories Model MFTF Surface Finish 63 to 250 RMS 63 to 500 RMS Approx. Finish/Pin 1 = 63 RMS, 2= 125RMS 1 = 63 RMS, 3 = 125 RMS, 6 = 500 RMS 4 = 250 RMS Tool Feed Rate .005" (0.13 mm) per pin. Pins must be engaged at opposing positions for even resurfacing. Axial Feed Rate Per Full Turn Adjustments 1/4 turn 1/2 turn 3/4 turn Internal Locking/ Locating Collet Internal Precision elbow mandrels with "Z" axis adjustment. Locking Alignment Centering/squaring machined aluminum plate, spoked adapter and dial indicator attachment for use with elbow mandrels. Minimum Mounting...

Open the catalog to page 2

Model MSF Elbow Mandrel Size A B C D E F Model MTF Elbow Mandrel Size MT1 MT2 MT3 MT4 Model MFTF Elbow Mandrel Size FT1 FT2 Specifications are subject to change without notice.

Open the catalog to page 3

O.D. Mount Flange Facing Our versatile line of split-frame machines use a counterbore head to quickly and accurately resurface flanges from 4.000" to 86.000" O.D. (101.6 mm to 2184.4 mm). By altering the number of tripper pins, surface finishes can be machined from 63 to 500 RMS. Contact your H&S representative or our headquarters at the information listed below. • 2010. All rights reserved. Form No. FF-06 Printed in U.S.A.

Open the catalog to page 4

All CLIMAX catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list