Packing big boring capability into a compact, modular machine, maximizing efficiency and minimizing downtime. Powerful Yet Compact • Take the power of a stationary machine to the job site to solve tough machining challenges in record time. • Using 11.3 in3 (185 cm3) Hydraulic motor, produces 2280 ft-lbs (3090 N^m) of torque at the bar, at 29 rpm. • Compact, modular components, many which can be lifted by hand, allow fast, easy setup, maximizing efficiencies, and minimizing downtime. • Huge machining range bores from 10.25 - 58.25 inches (260.4 - 1479.6 mm) in diameter, and faces from 9.6 - 61.9 inches (243.8 - 1572.3 mm). • ID and End mount bearings feature spherical taper-lock roller bearings. • End mount can be fine adjusted by +/-0.625 inches (15.9 mm) to center the bar. • Optional dual action boring/facing arms increase facing range, and allow for both boring and facing without switching equipment. Full-length square ways on boring/ facing arms allow for quick positioning anywhere along the arm. Attaches to the net fit tool carrier by compression-clamping, to provide maximum tool stability. • Machine is highly adjustable. The tool carrier, half nut, alignment of boring/ facing arm, and tool carriage can each be adjusted to maximize machining performance. • With leading & trailing boring head configuration, 2 boring heads can be used simultaneously. • For even greater facing range and longer continuous stroke, the new boring/facing arms are available. Setup is quick & easy, featuring industry standard quick-change tooling for both boring and facing operations. Highly versatile tool holder block accepts industry standard tooling with a nominal 0.5, 0.75, or 1 inch (12.7, 19.1, or 25.4 mm) square shank. Tool post on the boring/facing arm can be rotated to provide maximum flexibility in machining setup (including some cantilevered configurations). Net fit tool carrier can be clamped to bar for facing operations. For boring operations, carrier can be adjusted to remove clearance between carrier and the bar. This flexibility also ensures maximum rigidity for either operation Net fit tool carrier designed with a split frame to simplify installation on the boring bar. It can be configured to use either the boring head set for boring or facing, or the new boring/facing arm assembly. High Quality Design • Features a uniquely-designed modular tool carrier which provides a new level of strength and rigidity by channeling machining forces directly to the boring bar through strategically-located adjustable guide shoes. • Chromed bars, straight to within 0.001 inch per foot (0.0254 per 304.8 mm) • Gun-drilled bars with optical targets available. • Adjustable, removable half nut increases net fit tool carrier flexibility. Easy removal of tool carrier allows for machining of multiple bores. • Backlash adjustment nut allows in-the-field adjustment to eliminate backlash in the tool carrier, and extend the life of the machine.

Boring and Facing Ranges: Boring diameter range, standard stack block assembly: Boring diameter range, boring/facing arm assembly: with 18 inch (457.2 mm) boring/facing arm with 23 inch (584.2 mm) boring/facing arm with 34 inch (863.6 mm) boring/facing arm Facing diameter range, mechanical facing head assembly: Facing diameter range, boring/facing arm assembly: with 18 inch (457.2 mm) boring/facing arm with 23 inch (584.2 mm) boring/facing arm with 34 inch (863.6 mm) boring/facing arm Facing diameter range, boring/facing arm assembly (tool post reversed): (“tool post reversed” refers to rotating...

6. Select Boring Heads 7. Select a Boring/Facing Arm Assembly 8. Select a Hydraulic Motor 9. Select a Shipping Container To configure your BB7100 Boring Machine: 1. Select a Base Unit 2. Select an Axial Feed Assembly 3. Select Bearing Assemblies 5. Select Boring Diameter Ranges To configure the boring machine you require, simply select the option you need in each step, then contact your CLIMAX representative. Rotational drive unit, tool carrier assembly, tool kit, 54399 and instruction manual 2. Axial Feed Assembly Mechanical axial feed assembly 42407 Electrical axial feed assembly, 120V 43736...

OPERATIONAL DIMENSIONS Dimensions in Inch (mm) 20 - 46 inch (508.0 - 1168.4 mm) ID Mount (Face Adjust shown. Jack screw adjust ranges are the same) Q>@ -$&.6&5(:$'-8675$1*(66$0( 46 - 72 inch (1168.4 - 1828.8 mm) ID Mount (Face Adjust shown. Jack screw adjust ranges are the same) Q>@ -$&.6&5(:$'-8675$1*(66$0( CLIMAX Portable Machining & Welding Systems Web site: climaxportable.com Worldwide Phone: +1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: +1.503.538.7600 E-mail: [email protected]

Mechanical Axial Feed Assembly Electrical Axial Feed Assembly Rotational Drive Unit >@ >@ MECHANICAL AXIAL FEED ASSEMBLY CLIMAX Portable Machine Tools, Inc. © SEMBLY Newberg, OR USA 97132 MECHANICAL AXIAL FEED ASSEMBLY ools, Inc. © MECHANICAL AXIAL FEED ASSEMBLY CLIMAXCLIMAX Portable Machine Tools, Inc. © Systems Portable Machining & inside Welding Web site: climaxportable.com WWW.CPMT.COM U.S. 1-800-333-8311 page 5 CLIMAX Portable Machine Tools, Inc. © Newberg, OR USA 97132 Worldwide Phone: +1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: +1.503.538.7600 E-mail: [email protected] WWW.CPMT.COM...

OPERATIONAL DIMENSIONS Dimensions in Inch (mm) MIN FACE TOOL POST REVERSED ALL ARM LENGTHS 9.6 [244] Side view, boring/facing arm assembly CLIMAX Portable Machining & Welding Systems Web site: climaxportable.com Worldwide Phone: +1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: +1.503.538.7600 E-mail: [email protected]

Typical Courses Include: 9 Operator safety 9 Tool component review and setup 9 Standard operational techniques 9 Overview of cutting tools and recommend usage 9 Maintenance procedures 9 A certificate of achievement - is-sued to each student immediately following course completion Sign up today for training at one of our eight Global CLIMAX training centers. • Portland, Oregon • Houston, Texas • Baton Rouge, Louisiana • Cleveland, Ohio • Manchester, United Kingdom • Duren, Germany • Dubai, United Arab Emirates • Dammam, Saudi Arabia Backed by Over 50 Years of Experience CLIMAX pioneered the concept...