*mydirectindustry

Catalogs
CLIMATS
Volume less than 3m³ / E1-Type

Volume less than 3m³ / E1-Type

Product catalog summary

Overview: The document describes a 950 dm3 one-piece environmental test chamber designed to fit a 700x700 mm surface plate. It is engineered for climatic tests with vibratory stability and thermal insulation features.

Specifications:

Dimensions: Useful dimensions are 1000 mm width, 950 mm depth, and 1000 mm height. Overall dimensions are 1250 mm width, 2700 mm depth, and 1420 mm height.
Temperature Range: The chamber operates from +150°C to -75°C.
Speed Variation: It achieves a 5°C/min average speed variation from +75°C to -50°C with a 150 kg load.
Temperature Homogeneity: Homogeneities are maintained below ±1°C using PT100 probes set at 10 cm from the walls.
Temperature Regulation: Regulation is precise to ±0.2°C after stabilization.

Features:

The chamber includes a thermal insulation patch on the plate top and a silicone diaphragm underneath to prevent thermal bridging.
An additional measurement probe is available for direct thermal variation monitoring on the product, which can also serve as a regulation probe for precise slope control at 0.3°C/min.
A removable notch allows the chamber to be used as a standard climatic chamber.

Catalog excerpts

Expert in environmental simulation Climcits a schunk company 950 dm3 One-piece chamberENVIRONMENTAL TEST CHAMBER < 3m3 950 dm3 one-piece chamber, very low, meant to fit a 700x700 mm surface plate. Using a surface plate as a base for components enables to carry out climatic tests with a perfect vibratory stability. A thermal insulation patched on the plate top associated with a silicone diaphragm under the chamber is used to break the thermal bridge between the chamber and the plate. An additional measurement probe enables to appreciate the thermal variations directly upon the product ; this continuously recorded measurement can also be used as a regulation probe, enabling to perfectly control the required slopes (slopes controlled at 0,3°C/min). A removable notch is provided to allow the use of this machine as a standard climatic chamber. www.climats-tec.com Climats - Technopole Bordeaux Montesquieu- 2/4 allee Jacques Latrille CS 50067- 33650 Martillac - FRANCE Tel. +33 [015 56 20 25 25 e-mail: saLesiaclimats-tec.com

Open the catalog to page 1

Technical features : 5°C/min average from +75°C to -50°C and the other way round with a 150 kg load Homogeneity and Regulation Temperature homogeneities (carried out with PT100 probes set at 10 cm from the walls) below ±1°C Climats - Technopole Bordeaux Montesquieu- 2/4 allee Jacques Latrille CS 50067- 33650 Martillac - FRANCE Tel. +33 [015 56 20 25 25 e-mail: saLesiaclimats-tec.com

Open the catalog to page 2

Volume less than 3m³ / E1-Type

Volume less than 3m³ / E1-Type

Catalog excerpts

All CLIMATS catalogs and technical brochures

Archived catalogs