Catalogs >
CLIMATS >
Vibration and Temperature chamber on Lifting table

Vibration and Temperature chamber on Lifting table
2Pages

Catalog excerpts

Vibration and Temperature chamber on Lifting table - 1

Hot-Cold-Humid Rapid Temperature Cycling type of climatic chamber (1200 dm3) set on a lifting table intended for combined temperature / vibrations tests. Gone up on rails for an easy displacement, this machine, considering its clearance in height (over 2 m), makes it possible to cover and uncover a vibrating pot or a mobile plate of large dimensions This very powerful machine is equipped, as standard, with an additional group enabling to reduce at the most water and electricity consumptions during plateaux. 3 viewing windows have been installed to allow a great visibility of the tested products : 1 on the door and 1 on each side. ZI du Bedat - BP 67 - 33650 St Médard d'Eyrans - France www.climats-tec.com 1200 dm combined Vibration and Temperature

Open the catalog to page 1

Vibration and Temperature chamber on Lifting table - 2

Technical features Temperature range from +180°C to -80°C Speed variation 15°C/min average from +100°C à -40°C and the other way round with 200 kg load of aluminium Hygrometry from 10% to 98% humidity within the temperature range from +20°C to +90%, limited by a dewpoint of 8°C Homogeneity and Regulation Temperature regulation ±0,5°C after stabilization characteristics subject to change without notice and not contractual Humidity regulation ±1,5°C after stabilization ZI du Bedat - BP 67 - 33650 St Médard d'Eyrans - France www.climats-tec.com

Open the catalog to page 2