*mydirectindustry

Catalogs
CLIMATS
Modular room 31 m3

Modular room 31 m3

Product catalog summary

Overview
This document describes an enclosure designed for manufacturers and designers of thermodynamic solutions and renewable energies. It is used for functional and standards tests to validate the performance of heating systems and sanitary production systems, such as heat pumps and water heaters, under various climatic conditions.

Key Features

Rapid setup of temperature and humidity conditions to reduce test duration and ensure stability.
Equipped with Spirale Vision control for intuitive programming and archiving, used in over 6,000 test chambers worldwide.

Technical Specifications

Modular environmental chamber with a temperature range from -20°C to +50°C.
Large useful volume of 30,750 dm³.
Standards compliance: NF-EN 14511 and NF-EN 14825 for heat pumps, NF-EN 16147 for thermodynamic water heaters.
Temperature and humidity calibration according to IEC 60068-3-5 using 9 sensors.
Dimensions: Useful - 4100mm (Width) x 2500mm (Depth) x 3000mm (Height); Overall - 4500mm x 4100mm x 4100mm.

Options

Layout: Additional passages and sheet metal fitting.
Development: Acquisition system options including PT100 card, CT, or central acquisition unit.
Servitude: Demineralization system and water cooler.

Performance

Temperature and humidity control for specific conditions with PAC in operation.
Cooling rate from +20°C to -15°C in less than 1 hour with PAC at standstill.
Cooling capacity of 8 kW dissipation at -10°C in defrost mode.
Calorific power of 16 kW dissipation at -10°C in heating mode.
CAP airflow approximately 7500 m³/h.

Catalog excerpts

Expert in environmental simulation Climcits a schunk company Modular environmental chamber 31 m3 for heat pump & water heater testOUR PRODUCT LINES / RENEWABLE ENERGIESEnclosure designed to meet the specifications of manufacturers and designers of thermodynamic solutions and renewable energies. This equipment is dedicated to performing functional and standards tests, as part of the performance validation of thermodynamic solutions such as heating systems and sanitary production systems (heat pump, water heater). The main purpose of these tests is to ensure the behavior of the equipment under climatic conditions of temperature and humidity, and to qualify the performance of the system. The choice of this equipment is characterized by the speed with which climatic conditions are set up in temperature and humidity, thus reducing the duration of the tests, but also ensuring a very good stability of the climatic parameters. This chamber benefits from Spirale Vision control and its quality of regulation. You can also be able to appreciate the recognized programming and archiving features of this control system. Spirale, already present in more than 6,000 environmental test chambers and test benches in the world, is the most intuitive and versatile human-machine interface on the market. Climats - Technopole Bordeaux Montesquieu- 2/4 allee Jacques Latrille CS 50067- 33650 Martillac - FRANCE Tel. +33 [015 56 20 25 25 e-mail: saLesraclimats-tec.com

Open the catalog to page 1

Technical features ► Modular environmental chamber ► Temperature range from -20 °C to + 50 °C ► Very large useful volume of 30 750 dm3 For thermodynamic water heaters: ► Temperature and humidity calibration performed according to standard IEC 60068-3-5 (9 sensors) Demineralization system, water cooler ... Additional passages, sheet metal fitting... Acquisition system (PT100 card, CT or central acquisition unit), communication... Climats - Technopole Bordeaux Montesquieu- 2/4 allee Jacques Latrille CS 50067- 33650 Martillac - FRANCE Tel. +33 [015 56 20 25 25 e-mail: saLesiaclimats-tec.com

Open the catalog to page 2

► Temperature and humidity control on the following couples (PAC in operation) : ► Cooling rate from +20°C to -15°C in less than 1-hour PAC at standstill ► Cooling capacity of 8 kW dissipation at -10°C in defrost mode ► Calorific power of 16 kW dissipation at -10°C in heating mode www.climats-tec.com Climats - Technopole Bordeaux Montesquieu- 2/4 allee Jacques Latrille CS 50067- 33650 Martillac - FRANCE Tel. +33 [015 56 20 25 25 e-mail: saLesiaclimats-tec.com

Open the catalog to page 3

Modular room 31 m3

Modular room 31 m3

Catalog excerpts

All CLIMATS catalogs and technical brochures

Archived catalogs