Air generator Excal GT-FC Temperature : from -70°C to +200°C *Nm3 : normal cubic metre The Excal GT-FC air generator was designed for the thermal conditioning of electronic components. It can force air, at required flow rate and temperature, onto a very specific area. The air temperature can vary very quickly along a large range, with a short stabilization time : - Temperature range : from -70°C to +200°C - Temperature stability : ±0,1°C* - Average temperature transition time : >120°C/min ZI du Bedat – BP 67 – 33650 St Médard d'Eyrans - France www.climats-tec.com

Functioning principles After passing through a reconditioning dryer, the air is cooled down to the minimum temperature and then, heated up to the set-point temperature by a resistor located in the thermal head. An auxiliary dry air output enables the working area to be swept, thanks to a cap (not supplied), to prevent frost formation. The temperature regulation is either done in the thermal head or through a probe on the product to be tested. Construction The Excal GT-FC air generator has a refrigerating machinery, located into a soundproof cast solid unit. The operator interface consists of...