Group: Schunk Group
Catalog excerpts
EXTREME 320 Very compact and extremly fast environmental chamber ENVIRONMENTAL SIMULATION Fast Change Rate environmental test chamber (ESS) Designed to answer specifications in aeronautics and embedded electronics sectors. Mainly devoted to the burn-in of electronic components, this equipment makes it possible to carry out temperature tests supporting high-speed variations. Performance and ergonomics are two advantages of the EXTREME 320, thanks to an useful volume of 320 litres combined with a small footprint on the ground. The peculiarity of the EXTREME 320 is reaching a linear speed from point to point equal to 15°C/min with load. For the record, the linear speed corresponds to the chamber instantaneous speed, in opposition of the average speed which defining a duration. In addition, the point-to-point speed is different from the speed given according to the IEC 60068-3-5 standard. Indeed, the IEC 60068-3-5 standard considers only 80% of the temperature range whereas the point - to - point speed considers it in its whole. The fundamental quality of this machine is to obtain a linear velocity within the whole temperature range without generating over shoot or under shoot during the phases of arrival in regulation. For this purpose, the EXTREME 320 benefits from the piloting software Spirale3, which can control the phases of arrival in regulation optimally. You will also be able to appreciate the recognized functionalities of programming and archiving of this piloting system. Spirale 3, already presents in the world on more than 5 000 environmental chambers and test benches, is the most intuitive and polyvalente man-machine interface on the market.
Open the catalog to page 1Environmental chambers for temperature testing. Temperature range from +180°C to -80°C. Factory calibration table on 7 temperature points according to IEC 60068-3-5 (9 sensors). Options : Connect your equipments : 2 portholes of 150mm diameter on each side, with insulated and flexible silicone plugs. 1 notched porthole to connect the products to the outside of the chamber without disconnection. Adjust as close as possible to the product with 2 PT100 sensors : 1 control sensor & 1 mobile sensor Spirale 3 allows you to regulate the setpoint temperature on the control sensor and also to...
Open the catalog to page 2All CLIMATS catalogs and technical brochures
-
EXCAL² range
12 Pages
-
EXCAL² LEAFLET
2 Pages
-
CLIMATS UNIVERSE
11 Pages
-
RAIN TEST chamber
2 Pages
-
WINCAL SOLID WALK-IN CHAMBER
8 Pages
-
6 m3 one-piece chamber
2 Pages
-
1600 dm3 one-piece chamber
2 Pages
-
PRECISION SOLAR SIMULATION
4 Pages
-
Thermal tests on batteries
2 Pages
-
Rain spraying chamber
2 Pages
-
Thermal Chamber
2 Pages
-
Climatic chamber
2 Pages
-
GT-FC Air Generator
2 Pages
-
Industrial Oven - XL range
2 Pages
-
Laboratory Oven - XU range
2 Pages
-
Modular Chamber
2 Pages
-
THERMAL SHOCK SCAL SERIE
8 Pages
-
Dual-climate chamber
2 Pages
-
Vacuum oven XF range
2 Pages
-
G-type environmental chamber
2 Pages
-
CTh models
2 Pages
-
Laboratory ovens XU range
2 Pages
-
Benchtop - TM range
2 Pages
Archived catalogs
-
ENVIRONMENTAL TEST CHAMBER
12 Pages
-
CLIMATS General description
8 Pages
-
EXCAL series
12 Pages
-
CLIMATS programme
10 Pages
-
CTr range
2 Pages