Climatic chamber
Climatic chamber
The document describes a 2500 dm3 double-door climatic chamber designed to accommodate over 300 kg of equipment on a reinforced shelf. The chamber's large width of 2500 mm facilitates easy positioning and connection of the test sample.
Technical Specifications
- Temperature Range: Operates from +150°C to -70°C.
- Speed Variation: Achieves an average of 2°C/min from +70°C to -55°C with a 300 kg load, and 5°C linear within the temperature range with a 300 kg load.
- Hygrometry: Maintains humidity from 10% to 98% within the temperature range of +20°C to +90°C, limited by a dewpoint of 8°C.
- Homogeneity and Regulation: Temperature homogeneity is below ±1.5°C, measured with 9 PT100 probes set at 15 cm from the walls. Temperature regulation is ±0.3°C after stabilization, and humidity regulation is ±1.5% after stabilization.
Additional Notes
The characteristics are subject to change without notice and are not contractual.
Catalog excerpts
2500 dm3 double-door climatic chamber, intended to receive over 300 kg of equipment onto a reinforced shelf. Its loading large width (2500 mm) enables the tested sample to be easily positioned and, once set, still be connected without difficulty. ZI du Bedat - BP 67 - 33650 St Médard d'Eyrans - France www.climats-tec.com
Open the catalog to page 1
Technical features Temperature range from +150°C to -70°C Speed variation 2°C/min average from +70°C to -55°C with a 300 kg load 5°C linear within the temperature range with a 300 kg load Hygrometry from 10% to 98% humidity within the temperature range from +20°C to +90°C, limited by a dewpoint of 8°C Homogeneity and Regulation Temperature homogeneities (carried out with 9 PT100 probes set at 15 cm from the walls) below ±1,5°C Temperature regulation ±0,3°C after stabilization characteristics subject to change without notice and not contractual Humidity regulation ±1,5% after stabilization ZI...
Open the catalog to page 2All CLIMATS catalogs and technical brochures
Climats - General documentation15 Pages
EXCAL³7 Pages
VIBT2 Pages
RAIN TEST chamber2 Pages
WINCAL SOLID WALK-IN CHAMBER8 Pages
EXTREME 3202 Pages
6 m3 one-piece chamber2 Pages
1600 dm3 one-piece chamber2 Pages
PRECISION SOLAR SIMULATION4 Pages
Thermal tests on batteries2 Pages
Rain spraying chamber2 Pages
Thermal Chamber2 Pages
GT-FC Air Generator2 Pages
Industrial Oven - XL range2 Pages
Laboratory Oven - XU range2 Pages
Modular Chamber2 Pages
THERMAL SHOCK SCAL SERIE8 Pages
Dual-climate chamber2 Pages
Vacuum oven XF range2 Pages
G-type environmental chamber2 Pages
CTh models2 Pages
Laboratory ovens XU range2 Pages
Benchtop - TM range2 Pages
Archived catalogs
CLIMATS programme10 Pages
EXCAL series12 Pages
CLIMATS General description8 Pages
ENVIRONMENTAL TEST CHAMBER12 Pages
CTr range2 Pages
- CLIMATS test chamber
- CLIMATS temperature test chamber
- CLIMATS climate chamber
- CLIMATS quality control test chamber
- CLIMATS humidity test chamber
- CLIMATS environmental test chamber
- Stainless steel test chamber
- Vehicle test chamber
- CLIMATS test chamber with window
- Test chamber for the aeronautical industry
- Low-temperature test chamber
- Test cabinet on casters
- Electronic equipment test chamber
- Automobile test chamber
- High temperature test chamber
- Battery test chamber
- Aging test chamber
- Electrical equipment test chamber
- Automatic test chamber
- Thermostatic test chamber