ZI du Bedat – BP 67 – 33650 St Médard d'Eyrans - France www.climats-tec.com tel. : +33 5 56 20 25 25 - fax : +33 5 56 78 43 97 e.mail : [email protected] Benchtop TM range Useful volume : 55 or 80 litres Temperature range : from -65°C to +150°C Benchtops enable a product to be put through temperature tests in order to reveal its possible defects or to determine its life length. They can be used at any stage – from research to production – and are particularly valued in quality control because of the tests easy reproductibility. Their self sufficiency in use (an electrical socket is enough) and their dimensions grant them a great mobility : they can be installed on a table or a laboratory bench or, when on the cart (optional), be at working level. Each model offers different characteristics : - TM : full door, single-stage compressor (viewing window and cart as options) from -30°C to +150°C (+200°C as an option) - TMX : full door, cascade compressors(viewing window and cart as options) from -60°C to +150°C (+200°C as an option) - TMT : viewing window and light, cart, cascade compressors from -65°C to +150°C (+200°C as an option) Temperature rate : 3°C/min* within the range** *depending on the use conditions **calculation according to the NFX 15-140 standard

ZI du Bedat – BP 67 – 33650 St Médard d'Eyrans www.climats-tec.com tel. : +33 (0)5 56 20 25 25 - fax : +33 (0)5 56 78 43 97 e.mail : [email protected] Functioning principles A double air flow ventilation ensures a perfect homogeneity in the cabinet and allows a heating / cooling so that the set temperature is reached faster. Construction The TM benchtop consists of a stainless steel cabinet and of a removable griding on racks where the samples can be put onto. A 50x60mm notch on the left side makes it easier for the cables to go through and the right side (hinges side) is cut by a 80mm Ø...