9 m3 modular chamber for stabilized tests
9 m3 modular chamber for stabilized tests
The document describes a 9 m3 modular chamber designed for aeronautics applications, specifically for testing large products under stabilized conditions. The chamber is capable of maintaining temperatures at +60°C and -20°C for extended periods.
Specifications
- Temperature Range: The chamber operates within a temperature range of +80°C to -40°C.
- Speed Variation: It can achieve an average temperature change of 5°C per minute from +60°C to -10°C with a 300 kg load composed of stainless steel and copper.
- Homogeneity and Regulation: The chamber maintains temperature homogeneities below ±1°C and stability within ±0.5°C across the specified range.
Testing and Validation
The chamber underwent a comprehensive testing campaign, including characterization cycles and aging tests, to ensure reliability and performance. Acceptance testing was conducted with project engineers at the production site near Bordeaux to validate the equipment before delivery.
Design and Installation
The thermal conditioning components, including ventilation, measurement probes, and heating/cooling elements, are housed in an independent unit. This design facilitates easy and reliable reassembly and commissioning on-site.
Catalog excerpts
9 m3 modular chamber intended for aeronautics to test bulky products during several hours of stabilized tests at +60°C then at -20°C. This machine, as all chambers manufactured by CLIMATS, had overcome a complete tests campaign that includes characterization cycles but ageing tests as well. An acceptance with the engineers in charge of the project, on our production site near Bordeaux, has enabled to entirely valid the equipment before its delivery. The thermal conditioning part consisting of the ventilation, the measurement probes as well as the cold and hot batteries, is installed in an independent unit that enables an easy and reliable reassembling and commissioning on site. ZI du Bedat - BP 67 - 33650 St Médard d'Eyrans - France www.climats-tec.com 9 m modular chamber for stabilized tests
Open the catalog to page 1
Technical features Temperature range from +80°C to -40°C Speed variation 5°C/min average from +60°C à -10°C with a 300 kg load made of stainless steel and copper characteristics subject to change without notice and not contractual Temperature homogeneities below ±1°C within the range stability of ±0,5°C within the range ZI du Bedat - BP 67 - 33650 St Médard d'Eyrans - France www.climats-tec.com
Open the catalog to page 2All CLIMATS catalogs and technical brochures
Climats - General documentation15 Pages
EXCAL³7 Pages
VIBT2 Pages
RAIN TEST chamber2 Pages
WINCAL SOLID WALK-IN CHAMBER8 Pages
EXTREME 3202 Pages
6 m3 one-piece chamber2 Pages
1600 dm3 one-piece chamber2 Pages
PRECISION SOLAR SIMULATION4 Pages
Thermal tests on batteries2 Pages
Rain spraying chamber2 Pages
Thermal Chamber2 Pages
Climatic chamber2 Pages
GT-FC Air Generator2 Pages
Industrial Oven - XL range2 Pages
Laboratory Oven - XU range2 Pages
Modular Chamber2 Pages
THERMAL SHOCK SCAL SERIE8 Pages
Dual-climate chamber2 Pages
Vacuum oven XF range2 Pages
G-type environmental chamber2 Pages
CTh models2 Pages
Laboratory ovens XU range2 Pages
Benchtop - TM range2 Pages
Archived catalogs
CLIMATS programme10 Pages
EXCAL series12 Pages
CLIMATS General description8 Pages
ENVIRONMENTAL TEST CHAMBER12 Pages
CTr range2 Pages
- CLIMATS test chamber
- CLIMATS temperature test chamber
- CLIMATS climate chamber
- CLIMATS quality control test chamber
- CLIMATS humidity test chamber
- CLIMATS environmental test chamber
- Stainless steel test chamber
- Vehicle test chamber
- CLIMATS test chamber with window
- Test chamber for the aeronautical industry
- Low-temperature test chamber
- Test cabinet on casters
- Electronic equipment test chamber
- Automobile test chamber
- High temperature test chamber
- Battery test chamber
- Aging test chamber
- Electrical equipment test chamber
- Automatic test chamber
- Laboratory test cabinet