Hoppers & Bins Chutes & Pipes Rail Cars Precipitators Screening Filters > Rail Cars Molding Machines Core Machines Match Plates Shake-out Sand Bins Roll-Over Machines > Hoppers & Bins Chutes Rail Cars Forms > Hoppers & Bins Chutes & Pipes Rail Cars Screening Spray Dryers > Hoppers & Bins Rail Cars Precipitators Dust Collectors > Hoppers & Bins Chutes Rail Cars Screening Forms > Supply Hoppers Tote Bins Parts Tracks > Hoppers & Bins Rail Cars Precipitators Refractory Lining >

It is imperative that the compressed air be dry and lubricated. The lubricant should be injected into the air stream to create a fog or mist. This will maintain an oil film on the piston and the bore of the body. Where lubrication is not possible or extreme tempera-tures prohibit the use of oil, we can provide > POWERED vibrators with a special coating . The coating procedure enables the efficient running of the pis-ton vibrator without lubrica-tion. This space-age coating has also been found to extend the life of the vibrator. And, unlike other coatings, our spe-cial coating allows the user...

Bin Capacity lbs./kg Approx. Skin Thickness of Bin in/mm VMSAC Vibrator Size 200 91 1/8 3.2 1125 700 317 1/8 3.2 1150 ton/m. ton 1 0.9 1/8-3/16 3.2-4.8 1200 >

AIR CNSMP. cf/stroke liter/stroke @ 80 psig 5.4 bar

1-1/4" SAM has exhaust manifold at right angles to inlet >

AIR CNSMP. scfm/lpm (lpm=liters per min.) @60 psig 4.1 bar FREQUENCY > * (vibrations per min.) @60 psig 4.1 bar UHVM 1-1/4 1-1/4 3.2 8 3.6 7.2 204 4640 MODEL PISTON DIA. in/cm WT lbs/kg UH 2 2 14 6.4 9.6 272 4500 UHVM 2 2 5.1 23 10.2 7.2 204 4500 UH 1-1/4 1-1/4 8 3.6 6.3 188 8000 Specify UHVM-AC when quiet-operation air-cushioned vibration is required. > * Frequency data obtained through testing under a no-load condition. Frequency will decline as load is increased. > AIR CNSMP. scfm/lpm @60 psig 4.1 bar FREQUENCY > * (vib per min.) @60 psig 4.1 bar 2 2 5.1 33 14.9 7.2 204 4500 MODEL PISTON DIA....

VIBRATOR TYPE PISTON DIA. in/cm AIR CNSMP. - scfm/lpm (lpm=liters per min) > * Frequency data obtained through testing under a no-load condition. Frequency will decline as load is increased. size="-1">

Exhaust Port Protectors (2) 1/2 NPT for 3-1/2", 3/4 NPT for 4" & 5" >

IBRATORS > The Cleveland Vibrator Company offers a wide range of ball vibrators designed to keep stubborn materials flowing. These vibrators are powered by dry, compressed air. They produce a centrifugal force which makes them ideal for a number of applications. Ball vibrators are most commonly used as discharge flow aids on small to medium-size bins, hoppers and chutes. They are used in a variety of applications within the chemical, foundry and concrete industries. Ball vibrators feature a high quality ductile iron housing. These bodies are designed to quickly and easily mount to equipment....

VBB VBM ball vibrators incorporate the economy and efficiency of the Econ-O- Line series, with the quietness of an exhaust muffler. The standard muffler includes a built-in air regulator to con-trol vibration intensity and frequency. The dimensional and technical data for the VBM data are the same as compa-rable Econ-O-Line models, but the noise level is much lower. VBM-P models are nylon-coated ball vibrators with enclosed exhaust. The heavy-duty nylon coating encapsu- lates the entire vibrator. The VBM-P is ideal for applications that require a sanitary, corrosion-resistant vibrator. We also...

ERVICES SN SOLENOID VALVE These are electric 2-way, normally closed, internal pilot-operated solenoid valves. They are supplied with a Type 1 General Purpose Solenoid Enclosure. We offer 1/4", 3/8", 1/2" and 3/4" NPT sizes suitable for 110/1/60 operation. These valves are of brass construction. Special voltages and enclosures are available. QN QUICK DISCONNECT VALVE These manual valves are normally used to operate portable vibrators. They are not much larger than the hose diameter. There are no springs or washers to interrupt the flow of air. They will not fly apart when uncoupled. We offer 1/4",...