*mydirectindustry

Catalogs
Cleveland Motion Controls
MBL / MBLX Brushless Amplifier

MBL / MBLX Brushless Amplifier

Product catalog summary

Overview: The MBLX Series Servo Amplifiers are designed for efficient motion control, featuring pluggable screw connectors for various inputs and outputs, and options for DB9 or screw connectors for command input. They are available in both board level and housed versions, with the MBLX offering an integral power supply, in-rush limiter, and shunt regulator.

Design Features and Performance Benefits: These amplifiers utilize MOSFET PWM switching for four-quadrant current control. The MBLX model provides complete isolation of the user interface from the power stage, enabling transformer-less operation with 120 VAC. The MBL model is suitable for use with isolated DC power supplies with bus voltages ranging from 20 to 180 VDC. Both models are protected against overcurrent, overtemperature, and shorted outputs, with LED indicators for fault conditions.

Specifications:

Supply Voltage: 20 to 180 VDC
Peak/Continuous Current: 24 A/12 A
Switching Frequency: 20 kHz
Current Loop Bandwidth: 2.0 kHz
Max. Command Voltage: +/- 10 Volts
Max. Motor Voltage: 92% of DC Supply Voltage
Min. Motor Inductance: 1 mH
Min. Electrical Time Constant: 0.25 ms
Weight: 1.5 lbs

Ordering Information: The amplifiers can be ordered in various configurations, including options for sheet metal enclosures and terminal block options. Model numbers vary based on voltage and current specifications, with additional suffixes indicating specific features like housing or power supply inclusion.

Contact Information: For further inquiries, customers can contact the manufacturer at the provided phone and fax numbers.

Catalog excerpts

MBLX Series Servo Amplifiersuse convenient pluggable screw connectors for power supply input, motor output and auxiliary inputs, and a DB9 or pluggable screw connector on the command input.Loop gain and balance areadjusted with potentiometers. Peak and continuous currents are selected by pluggable resistors.Both the MBL and MBLX SeriesServo Amplifiers are available in board level and housed versions. The MBLX is also available with an integral power supply, in-rush limiter, and shunt regulator. The MBL and MBLX SeriesBrushless Servo Amplifiers are MOSFET pulse-width-modulated (PWM) switching amplifiers. The amplifiers provide four quadrant current control. The MBLX features complete isolation of the user interface from the power stage, allowing transformer-less operation with 120 VAC. Choose the lower cost MBL drive when using isolated DC power supplies with bus voltages of 20 to 180 VDC.The MBL and MBLX series ofservo amplifiers are protected against over current, over temperature, and shorted outputs. Easy to read LED indicators show fault conditions. The MBL and >

Open the catalog to page 1

River Park Commons, Suite 5602403 Sidney Street Pittsburgh, PA15203 Tel: (800) 401-1133 Fax: (412) 390-6102 size="-1">

Open the catalog to page 2

River Park Commons, Suite 5602403 Sidney Street Pittsburgh, PA15203 Tel: (800) 401-1133 Fax: (412) 390-6102 ٩ Copyright 1999. Cleveland Motion Controls. All Rights Reserved. Printed in U.S.A. 5/99 2.5M MBL/MBLX - DS >

Open the catalog to page 4

MBL / MBLX Brushless Amplifier

MBL / MBLX Brushless Amplifier

Catalog excerpts

All Cleveland Motion Controls catalogs and technical brochures